Active Member
|
[China]
Address: No.7 YingXing Middle Road, Donghuan Street, Shiqiao, Panyu District, Guangzhou
Contact name:Jody Peng
Guangzhou JASU Precision Machinery Co., LTD |
|
|
Conventional Single-stage process: The bottles are produced on machines that implement BOTH steps 1 and 2 by using PET raw material to mould preforms and then directly stretch-blow-moulding these preforms into the finished bottles or jars. Single-stage machines are well suited to medium production rates as well as for containers with non-standard necks, for which preforms would not be readily available in the market.
Such machines typically have three or four stations (injection, (conditioning), stretch-blowing and container ejection) with a rotary indexing table for transferring the preforms between stations. There are separate clamping units for opening and closing the injection moulds and the blow moulds.
Fully automatic control, easy to operate; realize no human hand contact in the production process of the product, to ensure that the product is clean and hygienic.
The machine can provide rapid molding performance, and there is no debris or connecting wires at the bottom or side of the bottle.
It allows more flexibility of shapes and geometries when processing because the preform is stretch blown immediately into the blow cavities which gives greater control of wall thicknesses.
This high-volume machine can produce bottles with multiple cavities at once.
Datum of Injection Stretch Blow Molding Machine / jar blow molding machine / injection blow molding machine
| Item | Unit | Machine Type | ||
| ISB 1100AN-3 | ||||
| Injection Part | Screw Diameter | mm | 50 | |
| Screw L/D Ratio | L/D | 24:1 | ||
| Screw Speed | r/min | 0-150 | ||
| Theoretical Injection Capacity | cm3 | 481 | ||
| Injection Pressure | MPa | 176 | ||
| Max. Hydraulic Pressure | Kg/cm | 140 | ||
| The Actual Injection Quantity | g(ps) | 452 | ||
| Oz | 16 | |||
| Screw Stroke | mm | 245 | ||
| Clamping Part | Blow Clamping Force | KN | 150 | |
| Clamp Tonnage | KN | 600 | ||
| Wheel Diameter | mm | 1100 | ||
| Max. Height | PP, PET, PETG, Tritan, PS, PC | mm | 200 | |
| PC, PETG, Tritan, PS | mm | 220 | ||
| Open Vertical Mode Trip | mm | 570 | ||
| Others | Max. Pump Pressure | MPa | 16 | |
| Servo Motor | Kw | 22 | ||
| Mode Opening/Locking Motor (Double Pump) | Kw | 22 | ||
| Electric Power | Kw | 12.2 | ||
| Tank Volume | L | 420 | ||
| Dimension of Machine | m | 4.5*1.95*3.4 | ||
| Machine Weight | T | 9 | ||
| --Parameters are subject to change without prior notice. --Providing PC, PET, PP, PS, PETG, TRITAN screw barrels according to customers' requirements. | ||||
Plastic manufacturing machine is widely used for various plastic materials and has broad application prospects
Suitable material inlcudeds PET, PETG, PC, PCTG, Tritan, SK etc.
Cosmetic bottles: mascara bottles, lotion bottles, cream bottles etc
Pharmaceuticals bottles / Medicine bottles: syrup bottles, eye drops bottles, pills bottles, oral liquid bottles, intravenous drip bottles etc.
Daily use bottles, households bottles, detergent bottles, laundary bottles, disinfectant bottle, personal care bottles
Food and beverage bottles, food and dairy bottles, carbonated drink bottles, oil bottles, dressing bottles, condiment bottles
Baby Feeding bottles
Pesticide bottle
Shapes: cylinder, jar, oblong, square, plain round, wide-mouth, oval, non-round, ultra-light etc.
Why JASU Precision Machinery?
We are THE FIRST to manufacture One Stage Injection Stretch Blow Molding Machine in China on basis of digestion and absorption of the advanced technology from
Japan and Germany.
Manufacturer/Direct Factory with production base takes 24000m2.
Own highly qualified technical staffs (20-30 persons) and R/D
center.
Obtained a number of technical patents.
Market network throughout the country , and export to many
countries of East Europe, South America, South Africa etc.
Our machine enjoyed high reputation among customers.
Overseas sales increase 33% annually.
Service technicians (holding visa and passport) are on call and
able to serve on site and instruct via voice and videos.
Question & Answer
Q1: Are you a factory or trading company?
A1: We are established in 2003, a actual factory and manufacturer
in the line of injection blow molding machine for 18 years.
Q2: Where is your factory located? How can I visit you?
A2: Our factory is located in Panyu District, Guangzhou, Guangdong
Province, China, about 48 minutes by high-speed railway from Hong
Kong.
5 minutes driving away from Shiqiao subway station.
We can book hotel for you and pick you up from CAN BAIYUN airport
or Guangzhou south railway station.
Q3: How about the payment term?
A3: Advancement (subject to our marketing strategy and both
parties' discussion) and settle the balance payment prior to
delivery.
Q4: What about your main market?
A4: Our machines were sold well in China, also exported and enjoyed
a good reputation among customers from Europe, Russia, Southeast
Asia, Middle and South America, Africa etc.
Our customers widely spread over Russia, Italy, Poland, Turkey,
Netherlands, Sweden, Bulgaria, Brazil, Ecuador, Thailand, India,
Myanmar, Malaysia, Vietnam, Cambodia, Egypt, Algeria, South Africa,
Ivory Coast, Philippines, Bangladesh......
Q5: How does your factory do regarding quality?
A5: Quality is the most important principle. JASU people always
attach great importance to quality controlling from the very
beginning to the very end. Our factory has passed ISO and CE
certification. Patents and many other certificates obtained also
tells this.
Q6: What about warranty and do the engineers available to overseas?
A6: One year warranty. During this period, if you need any support
on installation, adjustment , operation or maintenance, our
engineers can go abroad to fix for you.
Q7: Others?
A7: We will request the working voltage and power frequency at the
buyer's side when he placing the order.
Each order will be fulfilled as a turn key project of machine.
