Active Member
|
[China]
Address: B3 Building, An'le Industrial Zone, Hangcheng Road, Gushu, Xixiang town, Baoan, Shenzhen, China
Contact name:Jo Tsui
Shenzhen Yunlink Technology Co., Ltd. |
|
|
Ceiling Mounting Type 500mW High Power for More WiFi Range 300Mbps Wireless Access Point
XD9508Q is an indoor ceiling mount wireless access point for hotels, cafe, hosptical,school and home. Comply IEEE 802.11n 2T2R MIMO Technology, 300Mbps high speed, integrated IEEE 802.3af PoE, it can be installed in areas where power outlets are not readily available, easy installation and lower cost; Housed in a ceiling mountable case, the XD9508Q can be installed on a wall or ceiling to blends in nicely with most interior decorations in the house, to extend optimum wireless signal. Work with WLAN Controller, centralized configuration and management, easy to achieve WiFi Coverage and maintenance, access into Cloud Server to do remote monitor and Captive Portal authentication for more business value.
Features
300Mbps High Data Rate, high performance and adjustable RF Power
Equipped enterprise high performance Qualcomm Chipset, Comply IEEE
802.11n 2T2R MIMO Technology, 300Mbps high speed, allow all
connected devices to achieve faster upload/download Ethernet. With
powerful amplifier, improved the WiFi range for some area with
small quantity wireless AP; Can cut down RF power to suit for some
high density wireless AP area to avoid WiFi interference.
Power over Ethernet(PoE)
Integrated IEEE 802.3af Power over Ethernet (PoE), work with
standard PoE switch, pluy and play, installed in areas where power
outlets are not readily available, eliminating the mess of altering
existing network infrastructure.
Multiple Operation Mode for Multiple Application
Support Wireless AP, Gateway, WiFi Repeater to meet with different
installation requirements, such as Gateway for home use, WiFi
Repeater to extend the exist WiFi signal to more range
Spec:
Specification | |||
| Hardware | |||
| MCU | Qualcomm QCA9531 | ||
| RF | 2T2R, 300Mbps MIMO tech , comply with IEEE 802.11b/g/n standard | ||
| Memory | 64MB DDR RAM | ||
| Flash | 16MB | ||
| Interface | 2 x RJ-45 for 10/100 Mbps WAN/LAN Port (WAN port support IEEE 802.3af POE) | ||
| 1 x Reset button(Reset & Factory Defaults) | |||
| 1 x Power DC Jack | |||
Power
| DC: 12V/1A; 110V/220V XD9500Q: 24V Passive PoE XD9508Q: IEEE 802.3af 48V PoE | ||
| Antenna | Build in 2PCS Omni 5dbi antenna | ||
| Size | 168*35mm | ||
| RF | |||
| Frequency | 802.11b/g/n, 533MHz | ||
| 2.4~2.4835GHz | |||
| U.S.,Europe and Japan product covering 2.400 to 2.4835 GHz,programmable for different country regulations | |||
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM | ||
| DSSS = DBPSK, DQPSK, CCK | |||
| Throughput | 300 Mbps | ||
| Sensitivity | 802.11n(2.4GHz) | 802.11g | 802.11b |
| -90dBm @ MCS0 | - 90dBm @ 6Mbps | - 95dBm @ 1Mbps | |
| -70dBm @ MCS7 | - 72dBm @ 54Mbps | - 90dBm @ 11Mbps | |
| -90dBm @ MCS8 | |||
| -68dBm @ MCS15 | |||
| Output Power | Radio1(WLAN1) | ||
| 802.11n(2.4GHz)(± 1.5dBm) | 802.11g(± 1.5dBm) | 802.11b(±1.5dBm) | |
| 25dBm@ MCS0~2/MCS8~10 | 25dBm @ 6~24Mbps | 26dBm @1~11Mbps | |
| 25dBm @ MCS3/MCS11 | 24dBm @ 36Mbps | ||
| 24dBm @ MCS4/MCS12 | 24dBm @ 48Mbps | ||
| 24dBm @ MCS5/MCS13 | 24dBm @ 54Mbps | ||
| 24dBm @ MCS6/MCS14 | |||
| 23dBm @ MCS7/MCS15 | |||
Working Diagram:
Installation:
