Shenzhen Yunlink Technology Co., Ltd. |
|
900Mbps 500mW PTP PTMP 10KMs distance , WDS Connection 5.8G Outdoor CPE WiFi Repeater
CPE890SR is an high power industrial 5G outdoor CPE with the next generation 802.11ac Wi-Fi standard, Qualcomm Chipset, combined 900Mbps high speed in 5G, equipped Gigabit WAN port, 3 times Ethernet data rate faster than CPE880, it make more than 60 end users access into it and enjoy seamless HD movies, streaming, online gaming, wireless security and other bandwidth-intensive tasks.
900Mbps Data Rate & Gigabit WAN/LAN Ports
CPE890SR features 802.11ac Wi-Fi and 2*2 MIMO technology, 900Mbps
wireless speed. Equipped with Gigabit Ethernet port ensures high
speed internet access and more end users access.
10KM PTP/PTMP Distance
Designed in two line Power Amplifier on PCB board, the power can be
500mW high power, 18dBi MIMO high gain panel antenna, greatly
increase the wifi range to 10KM distance, then supply the stable
wifi signal for users.
Power over Ethernet
CPE890SR has integrated passive Power over Ethernet (PoE), for easy
installation and lower cost. So it can be installed in areas where
power outlets are not readily available, eliminating the mess of
altering existing network infrastructure.
Multiple operation mode, Press WDS Switch button to do PTP/PTMP Connection
CPE890SR support Gateway, WISP, Wireless AP, WiFi Repeater, WDS
operation mode, it is widely used in WiFi Bridge Connection, WISP
Connection and Wireless Security;
CPE890SR with WDS Switch button, press it to do the PTP/PTMP
connection, very easy, no need to access into GUI.
Access Controller System & Cloud Management System
With Access Control System under AP/WDS operation mode, easily
access advanced network settings through PC, like AP status
monitor, change IP address, ESSID, Channel, Password, upgrade
firmware, backup and restore....
Then work with Cloud Management System, easy to do central and remote management, advertisement and multi authentication make this AP more professional in WiFi Projects.
Spec:
Hardware: | |
Chipset | Qualcomm QCA9563 |
Standard | 802.11ac/a/n, MIMO technology |
Memory | 128MB DDR2 RAM |
Flash | 16MB |
Interface | 1 * 10/100/1000Mbps RJ45 WAN Port |
1 * 10/100/1000Mbps RJ45 LAN Port | |
1 * WDS switch button, press it to do WDS PTE/PTMP connection | |
1 * Reset button, press 15 seconds to revert to default setting | |
Antenna | Build in 18dBi MIMO Panel Antenna |
Power consumption | 24V PoE, <8W |
Size | 315mm * 145 mm * 80mm |
RF Data | |
Frequency | 5GHz: 802.11a/ac |
5GHz: 5180~5825MHz | |
Throughput | 900 Mbps |
Country code | FCC,IC,ETSI,MKK,MKK1,MKK2,MKK3,NCC,RUSSIAN,CN |
Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM |
DSSS = DBPSK, DQPSK, CCK | |
Receive Sensitivity& RF Power | |
RF Power | 802.11a:54M 23±2DB,6M 26±2DB. 802.11n HT20:MCS7 23±2DB, MCS0 26±2DB. 802.11n HT40:MCS7 22±2DB, MCS0 25±2DB. 802.11ac HT80:MCS9 20±2DB, MCS0 23±2DB. |
Receive Sensitivity | 802.11a: -72dbm@54Mbps; -90dbm@6Mbps. 802.11n HT20: -70dbm@MCS7, -90dbm@MCS0 . 802.11n HT40: -66dbm@MCS7, -90dbm@MCS0 . 802.11ac HT80:-60dbm@MCS9, -86dbm@MCS0 . |
EVM | 802.11n: ≤-28 DB 802.11a: ≤-25 DB |
Firmware Features: | |
Operation mode | Wireless AP, Gateway, WISP, WiFi Repeater, WDS |
WAN Type | Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access) |
Wireless Security | 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption |
SSID | Multiple SSID up to 4 |
Firewall | DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain
Filter IP and MAC Address Binding |
Protocols | IPv4 |
Others: | |
Package Contents | 900Mbps Dual Band wireless access point Ethernet Cable Quick Installation Guide Setting Accessory |
System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux |
Environment | Operating Temperature: -44~55 ℃ Storage Temperature: -40~70 ℃ Storage Humidity: 5%~90% non-condensing |
Management | Firmware GUI ,Remote Management, WLAN Controller, Cloud Management System |
Working Diagram: