Active Member
|
[China]
Address: B3 Building, An'le Industrial Zone, Hangcheng Road, Gushu, Xixiang town, Baoan, Shenzhen, China
Contact name:Jo Tsui
Shenzhen Yunlink Technology Co., Ltd. |
|
|
1200Mbps 48V 802.3 Active PoE with N-Femal Connectors Outdoor Wireless Access Point
HW-AP80 is an Qualcomm Solution 11ac high power industrial use Outdoor CPE with the next generation 802.11ac Wi-Fi standard, combined 1200Mbps Wi-Fi speed over 2.4GHz(300Mbps) and 5GHz(900Mbps), equipped Gigabit WAN port, fast Ethernet data rate make more than 100 end users can access into it to enjoy seamless HD movies, streaming, online gaming, wireless security and other bandwidth-intensive tasks.
Features:
1200Mbps High Speed and High NAT Conversion Rate
HW-AP80 compliant with 802.11ac technology to provide up to
1200Mbps data rate, 4 times faster wireless speed compared with
802.11b/g/ n products. Then the NAT conversion rate is >93% s to
achieve faster download and upload speed in a shorter time.
Multi operation mode for multi application
HW-AP80 support Wireless AP, Gateway, WISP, Wireless Bridge
operation mode, effective solution for PTP, PTMP application and
outdoor long range WiFi coverage or data transmission.
Access Controller & Cloud Server for Central Management and Captive Portal
Work with WLAN controller in wireless AP operation mode, easily
access advanced network settings through PC, like AP status
monitor, change IP address, ESSID, Channel, Password, upgrade
firmware, backup and restore.... Then work with Cloud Management
System, easy to do central and remote management, advertisement and
multi authentication make this device more professional in WiFi
Projects.
Dual band WiFi Channel Analyzer
Implanted wifi channel analyzer tool into Web interface,
administrator can use it to choose the channel with small amount AP
to avoid channel interference select.
High RF Power design but Manual adjustable
Designed in two line Power Amplifier on PCB board, HW-AP80’s RF
power can be 1000mW high power, can work with omni/panel antenna
for different environment, And this RF power is manual adjustable
to reduce WiFi Interference and improve wireless stability.
Spec:
| Hardware: | ||
| Chipset | Atheros QCA9563 + QCA9882 +QCA8334 | |
| Standard | 802.11ac/b/g/n, MIMO technology | |
| Memory | 128MB DDR2 RAM | |
| Flash | 16MB | |
| Interface | 1 * 10/100 /1000Mbps RJ45 WAN Port | |
| 1 * Reset button, press 15 seconds to revert to default setting | ||
| Antenna | 4PCS SMA connector | |
| Power consumption | 48V PoE<30W | |
| Weight | 4KGS | |
| RF Data | ||
Frequency | 2.4G: 802.11b/g/n; 5GHz: 802.11a/n/ac | |
2.4GHz: 2.312GHz to 2.4835GHz 5GHz: 5.020 - 6.1000 GHz | ||
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM | |
| DSSS = DBPSK, DQPSK, CCK | ||
| Throughput | 1200 Mbps | |
| RF Power | 2.4G: 11n @MCS7:26±2DB, @MCS0:28±2DB. 11g @54M:27±2DB, @6M:29±2DB. 11b @11M:28±2DB, @1M:30±2DB. 5.8G: 11a @54M 23.5±2DB, @6M:26.5±2DB. 11n @HT20:MCS7 22.5±2DB, @MCS0:25.5±2DB. 11ac@HT80:MCS9 20.5±2DB, @MCS0:23.5±2DB. | |
| Receive Sensitivity | 2.4G: 11n: -70dbm@MCS7, -88dbm@MCS0. 11g: -72dbm@54Mbps, -88dbm@6Mbps. 11b: -85dbm@11Mbps, -94dbm@1Mbps. 5.8G: 11a: -72dbm@54Mbps, -90dbm@6Mbps. 11n@HT20: -70dbm@MCS7, -90dbm@MCS0. 11ac@HT80:-60dbm@MCS9, -86dbm@MCS0. | |
| EVM | 802.11n: ≤-28 DB 802.11g: ≤-25 DB 802.11b: ≤-10 DB 802.11a: ≤-25 DB | |
| PPM | ±20ppm | |
| Max Users | 128+ | |
| Firmware Features: | ||
| Operation mode | Wireless AP, Gateway, WISP, Wi-Fi Repeater | |
| WAN Type | Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access) | |
| Wireless Security | 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption | |
| SSID | Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G) | |
| Firewall | DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain
Filter IP and MAC Address Binding | |
| Protocols | IPv4 | |
| Others: | ||
| Package Contents | 1200Mbps Dual Band wireless access point Ethernet Cable Quick Installation Guide Setting Accessory | |
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux | |
| Environment | Operating Temperature: -40~50 ℃, Storage Temperature: -40~70 ℃ Operating Humidity: 10%~90% non-condensing; Storage Humidity: 5%~90% non-condensing | |
| Management | Firmware GUI , Remote Management, WLAN Controller, Cloud Management System | |
Working Diagram:
