Active Member
|
[China]
Address: B3 Building, An'le Industrial Zone, Hangcheng Road, Gushu, Xixiang town, Baoan, Shenzhen, China
Contact name:Jo Tsui
Shenzhen Yunlink Technology Co., Ltd. |
|
|
Dual Band 1200Mbps 48V Active PoE with 4 Antenna Connectors Outdoor Wireless Access Point
HW-AP80 is an Qualcomm Solution 11ac high power industrial use Outdoor CPE with the next generation 802.11ac Wi-Fi standard, combined 1200Mbps Wi-Fi speed over 2.4GHz(300Mbps) and 5GHz(900Mbps), equipped Gigabit WAN port, fast Ethernet data rate make more than 100 end users can access into it to enjoy seamless HD movies, streaming, online gaming, wireless security and other bandwidth-intensive tasks.
Metal waterproof, dust proof and sunscreen shell, temperature adaptive
HW-AP80 with metal waterproof, dust proof and sunscreen shell,
avoid the damage from dust, thunderstorm weather. Meantime, it
adaptive to various environment, the working temperature can be
normal at -40℃ to 55℃. Suit for any country.
High Power design, SMA connector for external antenna, more range and stable signal
Designed in two line Power Amplifier on PCB board, the power can be
1000mW high power, 4PCS SMA connector,can connect with panel/omni
antenna based on request, can greatly increase the Wi-Fi range and
supply the stable Wi-Fi signal for users.
Power over Ethernet
HW-AP80 has integrated IEEE802.3at Power over Ethernet (PoE), for
easy installation and lower cost. So it can be installed in areas
where power outlets are not readily available, eliminating the mess
of altering existing network infrastructure.
Access Controller System & Cloud Management System
Work with WLAN controller in wireless AP operation mode, easily
access advanced network settings through PC, like AP status
monitor, change IP address, ESSID, Channel, Password, upgrade
firmware, backup and restore....
Then work with Cloud Management System, easy to do central and remote management, advertisement and multi authentication make this device more professional in Wi-Fi Projects.
Spec:
| Hardware: | ||
| Chipset | Atheros QCA9563 + QCA9882 +QCA8334 | |
| Standard | 802.11ac/b/g/n, MIMO technology | |
| Memory | 128MB DDR2 RAM | |
| Flash | 16MB | |
| Interface | 1 * 10/100 /1000Mbps RJ45 WAN Port | |
| 1 * Reset button, press 15 seconds to revert to default setting | ||
| Antenna | 4PCS SMA connector | |
| Power consumption | 48V PoE<30W | |
| Weight | 4KGS | |
| RF Data | ||
Frequency | 2.4G: 802.11b/g/n; 5GHz: 802.11a/n/ac | |
2.4GHz: 2.312GHz to 2.4835GHz 5GHz: 5.020 - 6.1000 GHz | ||
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM | |
| DSSS = DBPSK, DQPSK, CCK | ||
| Throughput | 1200 Mbps | |
| RF Power | 2.4G: 11n @MCS7:26±2DB, @MCS0:28±2DB. 11g @54M:27±2DB, @6M:29±2DB. 11b @11M:28±2DB, @1M:30±2DB. 5.8G: 11a @54M 23.5±2DB, @6M:26.5±2DB. 11n @HT20:MCS7 22.5±2DB, @MCS0:25.5±2DB. 11ac@HT80:MCS9 20.5±2DB, @MCS0:23.5±2DB. | |
| Receive Sensitivity | 2.4G: 11n: -70dbm@MCS7, -88dbm@MCS0. 11g: -72dbm@54Mbps, -88dbm@6Mbps. 11b: -85dbm@11Mbps, -94dbm@1Mbps. 5.8G: 11a: -72dbm@54Mbps, -90dbm@6Mbps. 11n@HT20: -70dbm@MCS7, -90dbm@MCS0. 11ac@HT80:-60dbm@MCS9, -86dbm@MCS0. | |
| EVM | 802.11n: ≤-28 DB 802.11g: ≤-25 DB 802.11b: ≤-10 DB 802.11a: ≤-25 DB | |
| PPM | ±20ppm | |
| Max Users | 128+ | |
| Firmware Features: | ||
| Operation mode | Wireless AP, Gateway, WISP, Wi-Fi Repeater | |
| WAN Type | Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access) | |
| Wireless Security | 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption | |
| SSID | Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G) | |
| Firewall | DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain
Filter IP and MAC Address Binding | |
| Protocols | IPv4 | |
| Others: | ||
| Package Contents | 1200Mbps Dual Band wireless access point Ethernet Cable Quick Installation Guide Setting Accessory | |
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux | |
| Environment | Operating Temperature: -40~50 ℃, Storage Temperature: -40~70 ℃ Operating Humidity: 10%~90% non-condensing; Storage Humidity: 5%~90% non-condensing | |
| Management | Firmware GUI , Remote Management, WLAN Controller, Cloud Management System | |
Working Diagram:
