Active Member
|
[China]
Address: 307, 6A, ANGU Industrial Park, No. 8, Dongwang Road, SIP, Suzhou, Jiangsu Province, China 215 123.
Contact name:Rocky
Sinotectronics Inc. |
|
|
Master Touch 49 Inch Vandal Proof Cost-effectiveness Touch Foil Screen
1. Product Description
Projective Capacitive touchscreen (P-CAP, Pro-Cap or PCAP touch screens) sensors function by maintaining a standing electrical charge across the sensor that extends through a contact surface, where changes in the electrical charge caused by the proximity of other capacitive bodies (such as touch stylus, fingers etc.) can be detected by a touch controller.
Due to the glass surface, the PCAP touch screens are particularly scratch-resistant and can be cleaned with all cleaning agents - an important advantage in hygienically sensitive areas.
2. Technical Datasheet
| Part No.: | MST-MCW-TFB-49-STA |
| BOM Code: | 1.11.490.02.0000 |
| Project Code: | M490B |
| Structure: | Film+Micro Copper Wire+Film |
| Copper Wire Diameter: | 15 microns |
| Base Material: | PET Film |
| Controller IC: | STA |
| Driver Type: | Driver-free, plug-n-play |
| Communication Interface: | USB2.0/3.0 |
| Working Voltage: | 5V |
| Standard USB Cable Length: | 1,500mm |
| Thru-Glass Capability: | Max. 10mm |
| Screen Ratio: | 16:9 |
| Foil Size: | 1108.10*641.23mm |
| Active Area: | 1084.76*610.18mm |
| Controller Size: | 120.0*53.0mm |
| FPC direction: | Long side |
| Light Transmittance | ≧89% |
| Lamination Method: | Wet Lamination (OCA) |
| Lamination Substrate: | Glass/Acrylic/PMMA or other non-metallic material |
| Inductive method | Improved projected capacitive technology |
| Touch accuracy | ±1mm |
| Touch Points | 1~20 points (adjustable) |
| Calibration method | Automatic |
| Response time | <10ms |
| Frame scan frequency | 120FPS |
| Lifetime | 9 Years |
| Temperature Range | -15℃ to + 75℃ |
| Working Environment | 0~ 95%RH(Unaffected by condensation) |
| OS compatibility | Windows XP ,Windows 7,Windows 8, Windows10 (32/64) |
| MAC OS X Lion | |
| Linux (Kernel version above 3.8) | |
| Above Android 4.0 (Kernel version above 3.1) | |
| EMC |
EN 61000-6-1:2007, EN 61000-6-3:2007+A1:2011 |
| Power Consumption | <0.5W |
| *This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions:(1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. | |
3. Drawing
4. Details
5. Advantages of MST Touch Film
| 1. Light in Transportation | 8. Work with projection film |
| 2. Easy DIY Lamination | 9. Cost-effectiveness |
| 3. Smaller gap lamination | 10. MOQ (Minimum Order Quantity)/Unlimited Quantity |
| 4. Water-proof function (ST Series) Water-proof, Dust-proof, Vandal proof | 11. Flat Design; Narrow Bezel; Attractive Appearance |
| 5. Thick glass penetration (Max. 10-15mm) | 12. Outdoor Application |
| 6. Lowest surface resistance | 13. Customized size Varies from 2 to 150 inch |
| 7. Big size capacitive touch requests: up to: 4.2*1.35m (L*H) | 14. Long life for both industrial and consuming level products application |
6. Application
| Interactive Shopping Window | Outdoor Digital Signage |
| Industrial Touch Panel | Interactive Black/White Board |
7. How is a touch foil made?
8. How does the touch foil work?
Touch Foil without touch: Voltage is even;
Touch with finger: Voltage will increase.
9. FAQ
