Active Member
|
[China]
Address: 307, 6A, ANGU Industrial Park, No. 8, Dongwang Road, SIP, Suzhou, Jiangsu Province, China 215 123.
Contact name:Rocky
Sinotectronics Inc. |
|
|
24 Inch Slim Design Optional Touch Points Capacitive Touch Sensor Foil Screen
1. Product Description
The principle of the Master Touch projected capacitive touch foil technology belongs to the projective capacitive screen. It is composed of two transparent thin films, with a grid matrix layer consisting of a layer of metal wires crisscrossed by X and Y axes. Each matrix forms an induction unit that can sense the touch of human hands. Touch foil is the only new method than can achieve curved surface, full transprency, waterproof, anti-pollution, anti-light interference, no frame and touch through glass.
2. Technical Datasheet
| Part No.: | MST-MCW-TFB-24-STM |
| BOM Code: | 1.11.240.02.0000 |
| Project Code: | M240B |
| Structure: | Film+Micro Copper Wire+Film |
| Copper Wire Diameter: | 15 microns |
| Base Material: | PET Film |
| Controller IC: | STM |
| Driver Type: | Driver-free, plug-n-play |
| Communication Interface: | USB2.0/3.0 |
| Working Voltage: | 5V |
| Standard USB Cable Length: | 1,500mm |
| Thru-Glass Capability: | Max. 10mm |
| Screen Ratio: | 16:9 |
| Foil Size: | 549.76*320.36mm |
| Active Area: | 531.31*298.66mm |
| Controller Size: | 87.0*47.0mm |
| FPC direction: | Long side |
| Light Transmittance | ≧89% |
| Lamination Method: | Wet Lamination (OCA) |
| Lamination Substrate: | Glass/Acrylic/PMMA or other non-metallic material |
| Inductive method | Improved projected capacitive technology |
| Touch accuracy | ±1mm |
| Touch Points | 1~12 points (adjustable) |
| Calibration method | Automatic |
| Response time | <10ms |
| Frame scan frequency | 120FPS |
| Lifetime | 9 Years |
| Temperature Range | -15℃ to + 75℃ |
| Working Environment | 0~ 95%RH(Unaffected by condensation) |
| OS compatibility | Windows XP ,Windows 7,Windows 8, Windows10 (32/64) |
| MAC OS X Lion | |
| Linux (Kernel version above 3.8) | |
| Above Android 4.0 (Kernel version above 3.1) | |
| EMC | EN 61000-6-1:2007, EN 61000-6-3:2007+A1:2011 |
| Power Consumption | <0.5W |
| *This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions:(1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. | |
3. Drawing
4. Details
5. Applications
6. FAQ
