SAK-TC299T-128F300S BC
Products Description:
The TC29x product family has the following features: • High
Performance Microcontroller with three CPU cores • Two 32-bit
super-scalar TriCore CPUs (TC1.6P), each having the following
features: – Superior real-time performance – Strong bit handling –
Fully integrated DSP capabilities – Multiply-accumulate unit able
to sustain 2 MAC operations per cycle – up to 300 MHz operation at
full temperature range – up to 120 / 240 Kbyte Data Scratch-Pad RAM
(DSPR) – up to 32 Kbyte Instruction Scratch-Pad RAM (PSPR) – 16 /
32 Kbyte Instruction Cache (ICACHE) – 8 Kbyte Data Cache (DCACHE) •
Lockstepped shadow cores for TC1.6P core 1 • Multiple on-chip
memories – All embedded NVM and SRAM are ECC protected – up to 8
Mbyte Program Flash Memory (PFLASH) – up to 768 Kbyte Data Flash
Memory (DFLASH) usable for EEPROM emulation – 32 Kbyte Memory (LMU)
– BootROM (BROM) • 128-Channel DMA Controller with safe data
transfer • Sophisticated interrupt system (ECC protected) • High
performance on-chip bus structure – 64-bit Cross Bar Interconnect
(SRI) giving fast parallel access between bus masters, CPUs and
memories – 32-bit System Peripheral Bus (SPB) for on-chip
peripheral and functional units – One bus bridge (SFI Bridge) •
Safety Management Unit (SMU) handling safety monitor alarms •
Memory Test Unit with ECC, Memory Initialization and MBIST
functions (MTU) • Hardware I/O Monitor (IOM) for checking of
digital I/O • Versatile On-chip Peripheral Units – Four
Asynchronous/Synchronous Serial Channels (ASCLIN) with hardware LIN
support (V1.3, V2.0, V2.1 and J2602) up to 50 MBaud – Six Queued
SPI Interface Channels (QSPI) with master and slave capability up
to 50 Mbit/s – High Speed Serial Link (HSSL) for serial
inter-processor communication up to 320 Mbit/s – Two serial Micro
Second Bus interfaces (MSC) for serial port expansion to external
power devices – Two MultiCAN+ Module with 6 CAN nodes and 384 free
assignable message objects for high efficiency data handling via
FIFO buffering and gateway data transfer – 15 Single Edge Nibble
Transmission (SENT) channels for connection to sensors – Up to two
FlexRayTM modules with 2 channels (E-Ray) supporting V2.1 – One
Generic Timer Module (GTM) providing a powerful set of digital
signal filtering and timer functionality to realize autonomous and
complex Input/Output management – One Capture / Compare 6 module
(Two kernels CCU60 and CCU61) TC290 / TC297 / TC298 / TC299 – One
General Purpose 12 Timer Unit (GPT120) – Five channel Peripheral
Sensor Interface conforming to V1.3 (PSI5) – Peripheral Sensor
Interface with Serial PHY (PSI5-S) – Inter-Integrated Circuit Bus
Interface (I2C) conforming to V2.1 – Optional IEEE802.3 Ethernet
MAC with RMII and MII interfaces (ETH) • Versatile Successive
Approximation ADC (VADC) – Cluster of 11 independent ADC kernels –
Input voltage range from 0v to 5.5V (ADC supply) • Delta-Sigma ADC
(DSADC) – Ten channels • Digital programmable I/O ports • On-chip
debug support for OCDS Level 1 (CPUs, DMA, On Chip Buses) •
Dedicated Emulation Device chip available – multi-core debugging,
real time tracing, and calibration – Aurora Gigabit Trace Port
(AGBT) on some variants – four/five wire JTAG (IEEE 1149.1) or DAP
(Device Access Port) interface • Power Management System and
on-chip regulators • Clock Generation Unit with System PLL and
Flexray PLL • Embedded Voltage Regulator
Technological Parameters:
category | Integrated Circuit (IC) |
manufacturer | Infineon Technologies |
series | AURIX™ |
Core processor | TriCore™ |
Kernel specifications | 32-bit three core |
speed | 300MHz |
Connectivity | ASC,CANbus,Ethernet,FlexRay,HSSL,I²C,LIN,MSC,PSI5,QSPI,SENT |
peripheral | DMA,WDT |
I/O count | 263 |
Program storage capacity | 8MB(8M x 8) |
Program Memory Type | flash memory |
EEPROM capacity | 384K x 8 |
RAM size | 728K x 8 |
Voltage Supply (Vcc/Vdd) | 3.3V,5V |
converter | A/D 84x12b, 10 x Trigonometric integral |
Oscillator Type | external |
operation temperature | -40°C ~ 125°C(TA) |
Supplier Device Packaging | PG-LFBGA-516-5 |
Customer Service:
1. Do you support BOM lists?
Of course, we have a professional team to provide BOM.
2. Shown below. Behind MOQ?
Our MOQ is flexible and can be provided according to your needs,
with a minimum of 10 pieces.
3. What about lead time?
After receiving the deposit, we will arrange to pack the goods and
contact logistics for delivery. The duration is 3-7 days.
4. Our advantage?
1. Stable and sufficient supply
2. Competitive pricing
3. Rich BOM experience
4. Perfect after-sales service
5. Professional test certificate
5. Our service?
Payment methods :T/T, L/C, D/P, D/A, MoneyGram, Credit Card,
paypal, Western Union, Cash, Escrow, Alipay...
6. Transportation:
DHL, TNT, FedEx, EMS, DEPX, Air, Sea Shipping
Product Photos: