ALLEGRO HALL IC CACS713ELCTR-20A-T CURRENT SENSOR FULLY INTEGRATED HALL EFFECT BASED LINEAR CURRENT SENSOR IC

ACS713,Fully Integrated, Hall-Effect-Based Linear Current Sensor IC with 2.1 kVRMS Isolation and Low-Resistance Current Conductor

Description                                                                                                            

The Allegro™ ACS713 provides economical and precise solutions for DC current sensing in industrial, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, switch-mode power supplies, and overcurrent fault protection. The device is not intended for automotive applications.

The device consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. A precise, proportional voltage is provided by the low-offset, chopper-stabilized BiCMOS Hall IC, which is programmed for accuracy after packaging.

The output of the device has a positive slope (>VIOUT(Q)) when an increasing current flows through the primary copper conduction path (from pins 1 and 2, to pins 3 and 4), which is the path used for current sampling. The internal resistance of this conductive path is 1.2 mΩ typical, providing low power loss. The thickness of the copper conductor allows survival of the device at up to 5× overcurrent conditions. The terminals of the conductive path are electrically isolated from the signal leads (pins 5 through 8). This allows the ACS713 to be used in applications requiring electrical isolation without the use of opto-isolators or other costly isolation techniques.

The ACS713 is provided in a small, surface mount SOIC8 package. The leadframe is plated with 100% matte tin, which is compatible with standard lead (Pb) free printed circuit board assembly processes. Internally, the device is Pb-free, except for flip-chip high-temperature Pb‑based solder balls, currently exempt from RoHS. The device is fully calibrated prior to shipment from the factory.

 Features                                                                                                               

▪ Low-noise analog signal path

▪ Device bandwidth is set via the new FILTER pin

▪ 5 µs output rise time in response to step input current

▪ 80 kHz bandwidth

▪ Total output error 1.5% at TA= 25°C

▪ Small footprint, low-profile SOIC8 package

▪ 1.2 mΩ internal conductor resistance

▪ 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8

▪ 5.0 V, single supply operation

▪ 133 to 185 mV/A output sensitivity

▪ Output voltage proportional to DC currents

▪ Factory-trimmed for accuracy

▪ Extremely stable output offset voltage

▪ Nearly zero magnetic hysteresis

▪ Ratiometric output from supply voltage.

Applications                                                                                                        

The ACS713 outputs an analog signal, VOUT. that varies linearly with the unidirectional DC primary sampled current, IP, within the range specified. CF is recommended for noise management, with values that depend on the application.

 Date Sheet                                                                                                           

Quality Assurance                                                                                              

1: Before the products are put into storage, we will preliminarily verify the external packaging,labels,

quantity, etc. of the products;

2: After the preliminary inspection, the products will enter the inspection waiting area,and thenwe will

use professional equipment for inspection Equipment such as X-RAY gold sample detection, silk

screen contrast detection with magnifying glass, and alcohol detection,The silk screen shall be

checked, and the qualified ones shall be printed and put into storage.

3: The product will be stored in a constant temperature and humidity environment, and aspecially

assigned person will check, confirm and record it every day.

4: Before the products are delivered from the warehouse, the first and second tests will be repeated

according to the customer's order to ensure that the outgoing products reviewthe customer's

requirements.

Transportations & Payments                                                                             

Frequently Asked Questions                                                                              

Shipping:

1, We can shipping all over the world by DHL, UPS, FEdex, TNT and EMS.The packaging is very

safe and strong. Please nitfy me you have any special needs
2, It will take around 3-5 days to reach your hands.

Product Type & condition:
Because of the fluctuant sales situation. the stock parts are always changing and the stock list cannot

be, promptly updated.So please consult the stock situation when you inquire.

Buyer Reading:
1. Please confirm receipt of products if the items you received,and if the goods was damaged please

contact us immediately. send the photo to us that we can check and give you best solution

2. We only guarantee delivery in time but we couldn't control the express delivery time. Our related

sales person will be responsible to send the AWB for the delivered goods in the next workday.

you can check the AWB in the website which we send to you. For the AWByou also can call to the

local branch of the express company in your company.

Pre-sales service :

1. Our team design and make solutions based on different requirements from different customers.

2. We provide 24-hours service,and every message you quote inquiry will be replied within12 hours