Home Companies Shenzhen Sanhuang Electronics Co.,Ltd.

XC9236D08CER-G IC REG BUCK ADJ 600MA 6USPC Torex Semiconductor Ltd

Shenzhen Sanhuang Electronics Co.,Ltd.

Contact Us

[China] country

Trade Verify

Address: No. 2520, 25th Floor, Block A, New Asia Guoli Building, Huaqiang North Street, Shenzhen, China

Contact name:Lin

Inquir Now

Shenzhen Sanhuang Electronics Co.,Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

XC9236D08CER-G IC REG BUCK ADJ 600MA 6USPC Torex Semiconductor Ltd

Country/Region china
City & Province shenzhen
Categories Motors
InquireNow

Product Details

Product Details

 

GENERAL DESCRIPTION

The XC9206/XC9207/XC9208 series is a group of DC/DC converters with a built-in 0.4Ω P-channel driver transistor, offered in a SOT-25 package. The ICs are designed to provide high efficiencies and a stable power supply with an output current of 500mA using only a coil, a diode and two ceramic capacitors connected externally.
Minimum operating voltage of the XC9206/9207 is 1.8V and 2.0V for XC9208. Output voltage is internally programmable in a range from 0.9V to 4.0V in 100mV increments (accuracy: ±2.0%). Oscillation frequency is selectable from 300kHz, 600kHz and 1.2MHz so that the frequency best suited to your particular application can be selected. Each series features different operation modes: PWM control (XC9206 series), automatic PWM/PFM switching control (XC9207 series) and manual PWM/PFM switching control (XC9208 series). The series gives fast transient response, low ripple and high efficiency over the full range of load (from light load to high output current conditions). The soft start and current control functions are internally optimized. During stand-by, all circuits are shutdown to reduce current consumption to as low as 1.0μ A or less. With the built-in U.V.L.O. (Under Voltage Lock Out) function, the internal P-channel driver transistor is forced OFF when input voltage becomes 1.4V or lower.

 

 

■ FEATURES

P-ch driver Tr. Built-in : ON resistance 0.4Ω
Output Voltage Range : 0.9V ~ 4.0V (100mV increments) Fixed output voltage accuracy ±2%
Oscillation Frequency : 300kHz, 600kHz, 1.2MHz Fixed oscillation frequency Accuracy ±15%
Stand-by function : Istb = 1μ A (MAX.)
Current Limiter built-in : 600mA
Input Voltage Range : 1.8V ~ 6.0V(XC9206/XC9207)
2.0V ~ 6.0V (XC9208)
Output Current : 500mA
Maximum Duty Ratio : 100%
PWM/PFM Switching Control (XC9207 / XC9208)
Ceramic Capacitor Compatible
Soft start circuit built-in
Small Package : SOT-25

 

 

■ APPLICATIONS

● Mobile phones
( PDC, GSM, CDMA, IMT2000 etc.)
● PDAs, Portable communication modems
● Portable games
● Cameras, digital cameras
● Cordless phones
● Note book computers

 

Specifications

AttributeAttribute Value
ManufacturerTorex Semiconductor
Product CategoryDC Switching Regulators
Series-
PackagingTape & Reel (TR)
Package-Case6-UFDFN Exposed Pad
Operating-Temperature-40°C ~ 85°C (TA)
Mounting-TypeSurface Mount
Output-TypeAdjustable
FunctionStep-Down
Supplier-Device-Package6-USPC (1.8x2)
Number-of-Outputs1 Output
TopologyBuck
Frequency-Switching1.2MHz
Current-Output600mA
Output-ConfigurationPositive
Output Voltage0.9V
Voltage-Output-Max6V
Synchronous-RectifierYes
Voltage-Input-Min1.8V
Voltage-Input-Max6V

Descriptions

Buck Switching Regulator IC Positive Adjustable 0.9V 1 Output 600mA 6-UFDFN Exposed Pad

Hot Products

Product Details DESCRIPTION The LT®3992 is a dual current mode PWM step-down DC/DC converter with ...
Product Details Description • For 1/4" x 11/4" (6.3 x 32mm) fuses • Bolt-in and snap-in mounting ...
Product Details FAST SWITCHING PLASTIC RECTIFIER VOLTAGE - 50 to 1000 Volts CURRENT - 3.0 Amperes ...
Product Details Description The LTC®3610 is a high efficiency, monolithic synchronous step-down DC...
Product Details GENERAL DESCRIPTION The XC9206/XC9207/XC9208 series is a group of DC/DC converters ...
Product Details Description: The LM2576T-5.0/NOPB is a DC switching regulator from Texas Instruments ...