|
[China]
Trade Verify
Address: Block B 1307, Green Square, Huaiyin District, Jinan China
Contact name:Rose
Jinan Lijiang Automation Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
Higher working efficiency Insulating glass production line double
glazing glass machine
1,Loading section(with low-e checking)
2,washing and drying section(can washing low-e glass)
3,conveyor section
4,checking and assembly section
5, conveyor , measure and sensor section
6,press part with gas filling
7,unloading section
As the most important process of insulating glass production,
we are especially professional in glass cleaning, transmitting
pressing and gas filling.
The production line can do double glass,triple glass and stepped
glass
The whole line include 7 parts: (from right to left)
1, Insulating glass production line Introduction
About the IG line only need focus on the two part -WASHING DRYING
PART AND PRESSING PART .All other part just conveyors and assembly,
no much technology, so please focus on that two .
1, To Avoide the low-e Glass put inverse side and Leave wheel marks
or scratch low-e Coating
We use coating inspection -metal film conductive (other company use
Photoelectric detection,
hard to recognize for higher transparent)
2, Three pairs soft brushes can wash low-e glass and normal glass ,
the diameter is less than 0.1mm.
3, Materials are stainless steel.
4, Air knife is float design , it always keep the right and suitable distance 3mm
between the glass surface and air knife (Same like LISEC structure
) check the following picture. (3mm is the best drying distance)
5, The front and back side squeeze wheel are all actively moved and
convey. No mater the glass size is big /small or thickness
different(8mm) , it all guarantee the glass pass through smoothly.(Same like LISEC)
There is a universal joint device.When the glass thickness was changed, the wind knife can move forward and backward to adjust the distance, so that the relative distance between the wind knife and the glass is constant, so as to avoid the damage to the glass due to the change of the glass thickness.
Adjustable points
It has adjustable points on the pressing plate.
As we know, the press plate will be out of shape after long time
using.So its pressing performance will be dramatically reduced.With
these points, we can adjust the flatness of the pressing section,
so that it can ensure stable performance.
Main Parameter
| Washing speed | 10~15m/min |
| Max.working speed | 45m/min |
| Washing glass thickness | 3~15mm |
| Max.insulating glass thickness | 80mm |
| Conveyor height | 500mm |
| Min.glass size | 450×280 |
| Max.glass size | 2500×4000 |
| Max.glass size | 2500*3500mm(LJBZ2535)Gas fillier line :2500*3200mm |
| Min.glass size | 280*450mm |
| Glass thickness | 3-15mm |
| Insulating glass thickness | 40mm |
| Glass washing speed | 2-10m/min |
| Glass conveyor speed: | 48m/min |
| Washing brushes | 3 pairs |
| Water supply: | Water consumption:0.5t/h conductivity:≤50μs/cm |
| Air supply | Flow: 0.8m/min |
| Air pressure | ≥0.8MPa |
| Total power | 3P380V 50HZ 34KW |
| Dimension | 23500*3500*3700mm |
Main Products
Vertical Insulated Glass Produce Line for double glass production
line
Auto Sealing Robot for double glass production line
Sealant Spreading Machine for double glass production line
Low-E Glass Washing &Drying Machine for double glass production
line
Smart Edge Deleting Machine for double glass production line
Automatic Spacer Bending Machine for double glass production line
Automatic Desiccant Filling Machine for double glass production line
Butyl Extruder Machine for double glass production line
Glass Edge grinding Machine for double glass production line
Spacer Cutting Machine for double glass production line
Sealing gun Freezer for double glass production
Rotated Sealant Spreading Table double glass sealing
Argon Gas Filling Machine double glass
