JinJiang LiQi Mould Co., Ltd |
|
Mold Maker ABS Injection Mold Specializes In Customizing High Precision
ABS Injection Mold Pressure:
Because of ABS’s viscosity, higher injection pressures are needed
than for many other materials, but lower pressures may still be
suitable for smaller, simpler, or thicker products. Just bear in
mind that if the injection pressure is too high, increased friction
can cause molded parts to stick, which complicates their removal
and adds to production costs. If the pressure is too low, mold
shrinkage increases and can result in out-of-tolerance parts that
won’t meet end-use requirements.
Product Description:
Flame retardant rating | UL94V-0 | Other Material | Nylon PA66, PA6T, PA9T with glass fiber LCP, PBT, POM, etc. |
Color | Black | Other standard | Halogen-free Compliant |
RoHS Compliant | Yes | Lead time | 7~15 days |
MOQ | 100~500 PCS per lot | Advantages | 1, Both have vertical and horizontal type injection machines. 2, Offering one-stop fabrication services from mold design, manufacture, assembly, and delivery. 3, Short delivery time, but quick response. 4, Professional in various material. 5, Strong R&D support, and quality assurance. |
How Does Plastic Injection Mould Work?
The manufacturing process for molded parts is complex. Before your
parts are even molded, we're there to help you with comprehensive
manufacturability feedback and consultative design services, so you
can avoid mold design pitfalls before the resin hits the mold. From
there, our production process is documented and optimized using
scientific molding so you get high-quality parts consistently and
reliably with every production run.
Critical-to-quality (CTQ) dimensions you call out on models let us know what areas are most crucial to the success of your parts. Once the parts start molding, the process and samples are qualified using automated inline CMM technology, generating a detailed FAI and process capability study with no additional lead time.
Our thermoplastic injection molding is a standard process involving an aluminum mold with no heating or cooling lines running through it, which means cycle times are a bit longer. As part of the scientific molding process, our molders independently optimize and monitor fill speed, hold pressure, and hold time, and periodically inspect part quality and cosmetics. During the molding process, we use an automated inline CMM to ensure dimensional accuracy, as well as generate a detailed process capability study and FAI report.
Resin pellets are loaded into a barrel where they will eventually be melted, compressed, and injected into the mold’s runner system. Hot resin is shot into the mold cavity through the gates and the part is molded. Ejector pins facilitate removal of the part from the mold where it falls into a loading bin. When the run is complete, parts (or the initial sample run) are boxed and shipped shortly thereafter.
FAQ
1. When can I get the price?
A: We usually quote within 24 hours after we get your inquiry.
2. How long is the lead time for mold?
A: It depends on the mold’s size and complexity. Normally, it nees
about 25-35 days.
3. I don't have 3D drawing, how should I start the new project?
A: You can provide us a sample, we will make 3D drawing design.
4. Can we mass produce in your local?
A: Yes, you can leave the mould in our factory, we can produce for
you.
5. Can we get a sample when mould finished?
A: Yes, we usually send out samples for customers' checking, then
mass production after samples comfirmed.
6. Before shipment, how to make sure the products quality?
1) We have QC to inspect the products before each shipment.
2) We can send you videos to show the production process.
3) You can come to visit our factory or ask a third party for
inspection.
7. How could I pay?
A: Paypal, Western Union, T/T are acceptable, so just let us know
which is convenient for you.
8. How to ship?
A: By sea/ By air/ By Express.