|
[China]
Trade Verify
Address: 19/F, Building 9, No. 1, Jingdong Road, Fenggang Town, Dongguan City, Guangdong Province
Contact name:Zeki
Guangzhou Herong Intelligent Device Technology Co., Limited |
|
Verified Suppliers
|
|
|
OEM Precision Manufacturing Die Cast Aluminum Alloy Die Casting Steering Wheel Auto Parts
Herong Intelligent Co, Ltd is an enterprise specializing in the design and manufacture of die-casting molds and the processing of die-casting products, there are a number of turning, milling, grinding, drilling, CNC lathes, CNC milling machines, wire cutting machines, EDM machines, cold chambers, hot chamber die-casting machines and other equipment.
| ZL108 | ZL108 has high Si content, and Mg, Cu, Mn are added, which makes the alloy have excellent casting performance, small thermal expansion coefficient, good wear resistance, high strength, and good heat resistance. However, the corrosion resistance is slightly low | It is suitable for making piston of internal combustion engine and other parts requiring wear resistance, as well as parts requiring stable size and volume. Die casting and metal mold casting are mainly used, and sand mold casting can also be used | Die casting, metal mold casting |
| ZL109 | This is a complex alloying Al Si Cu Mg Ni alloy. Due to the increase of Si content and the addition of Ni, the alloy has excellent casting performance, air tightness, high temperature strength, wear resistance and corrosion resistance are also improved, and the linear expansion coefficient and density are also greatly reduced, | It is suitable for making internal combustion engine piston and parts that require wear resistance, stable size and volume. It mainly uses metal mold casting and sand mold casting. | Sand mold casting, Metal Mold casting, |
| ZL111 | ZL111 is a complex alloying alloy. Due to the addition of Mn and Ti, the alloy has excellent casting performance, good corrosion resistance, air tightness and high strength. Its welding and cutting performance is general | It is suitable for casting power structural parts with complex shape and bearing heavy load (such as aircraft engine parts, water pump body parts, oil pump spare parts, impeller, etc.), and other parts requires good air tightness | Sand mold casting, Metal Mold casting, die casting |
| ZL112 | It has good casting properties and high mechanical properties, and is mainly used for heavy load engineering structures and other parts | such as valve housing, impeller, etc. | Sand mold and metal mold casting are mainly used. |
| ZL113 | By removing Zn and Sb from ZL112 Aluminum Die Casting alloy and adding Ti and Be, the grain of the alloy is refined, and the harmful effect of Fe is reduced, so that the alloy has good casting performance, air tightness and high mechanical properties. | It is suitable for casting power structural parts that bear heavy loads, such as some parts on aircraft and missiles and various parts on civil products that require good comprehensive performance. | Mainly used for sand mold and metal mold casting |
Product show
| CHINA | USA AA/ASTM | USA SAE | UK | Japan JIS H 5302 | ISO | EN AC- |
| YL104 YZA1Si10Mg | A360 | 309 | LM 9 | ADC3 | Al-Si10Mg | 43400 |
| YL113 | 383 | 383 | LM 2 | ADC12 | Al-Si10Cu2Fe | 46100 |
| YL112 YZA1Si9Cu4 | A380 | 306 | LM 24 | ADC10 | Al-Si8Cu3Fe | 46500 |
| YL108 YZA1Si12Cu2 | 413 | - | LM 6 | ADC1 | Al-Si12 Al-Si12Fe | 47100 |
| YL102 YZA1Sil2 | A413 | 305 | LM 20 | ADC1 | Al-Si12Cu Al-Si12CuFe | 44300 |
We want to exceed your expectations by delivering the most economical solution for your product manufacturing needs. We do this by constantly evolving what we do, and finding new ways to improve your current products, that will ultimately drive down costs and increase overall performance.
With our extensive experience in casting, forging, fabrication and machining, we can provide the best production method to manufacture your products. Welcome your inquiry us in any time.
FAQ
1. Where is your factory?
We are located in Guangzhou China.
2. Avaliable for customized design drawings?
Yes, DWG, DXF,DXW, IGES, STEP, PDF etc.
3. Will my drawing be safe after you get it?
Yes, we can sign the NDA before you send the drawing.
4. What s the MOQ?
In general 100 but can accept Small quantity in special conditions.
5. Do you provide samples?
Yes, just need sample cost, we will return it back in mass
production.
6. What's the leading time?
It depends on quantity, generally 3-15 days after order
confirmation.
