|
[China]
Trade Verify
Address: 19/F, Building 9, No. 1, Jingdong Road, Fenggang Town, Dongguan City, Guangdong Province
Contact name:Zeki
Guangzhou Herong Intelligent Device Technology Co., Limited |
|
Verified Suppliers
|
|
|
Customized Aluminium Alloy Pressure Die Casting Die Cast Electric Actuator Housing
Herong Intelligent Co, Ltd is a professional production and processing company of mechanical equipment parts, cast aluminum parts turning casting, cast iron casting, copper casting mold production, hardware and other products, with a complete and scientific quality management system.
| ZL108 | ZL108 has high Si content, and Mg, Cu, Mn are added, which makes the alloy have excellent casting performance, small thermal expansion coefficient, good wear resistance, high strength, and good heat resistance. However, the corrosion resistance is slightly low | It is suitable for making piston of internal combustion engine and other parts requiring wear resistance, as well as parts requiring stable size and volume. Die casting and metal mold casting are mainly used, and sand mold casting can also be used | Die casting, metal mold casting |
| ZL109 | This is a complex alloying Al Si Cu Mg Ni alloy. Due to the increase of Si content and the addition of Ni, the alloy has excellent casting performance, air tightness, high temperature strength, wear resistance and corrosion resistance are also improved, and the linear expansion coefficient and density are also greatly reduced, | It is suitable for making internal combustion engine piston and parts that require wear resistance, stable size and volume. It mainly uses metal mold casting and sand mold casting. | Sand mold casting, Metal Mold casting, |
| ZL111 | ZL111 is a complex alloying alloy. Due to the addition of Mn and Ti, the alloy has excellent casting performance, good corrosion resistance, air tightness and high strength. Its welding and cutting performance is general | It is suitable for casting power structural parts with complex shape and bearing heavy load (such as aircraft engine parts, water pump body parts, oil pump spare parts, impeller, etc.), and other parts requires good air tightness | Sand mold casting, Metal Mold casting, die casting |
| ZL112 | It has good casting properties and high mechanical properties, and is mainly used for heavy load engineering structures and other parts | such as valve housing, impeller, etc. | Sand mold and metal mold casting are mainly used. |
| ZL113 | By removing Zn and Sb from ZL112 Aluminum Die Casting alloy and adding Ti and Be, the grain of the alloy is refined, and the harmful effect of Fe is reduced, so that the alloy has good casting performance, air tightness and high mechanical properties. | It is suitable for casting power structural parts that bear heavy loads, such as some parts on aircraft and missiles and various parts on civil products that require good comprehensive performance. | Mainly used for sand mold and metal mold casting |
Product show
| CHINA | USA AA/ASTM | USA SAE | UK | Japan JIS H 5302 | ISO | EN AC- |
| YL104 YZA1Si10Mg | A360 | 309 | LM 9 | ADC3 | Al-Si10Mg | 43400 |
| YL113 | 383 | 383 | LM 2 | ADC12 | Al-Si10Cu2Fe | 46100 |
| YL112 YZA1Si9Cu4 | A380 | 306 | LM 24 | ADC10 | Al-Si8Cu3Fe | 46500 |
| YL108 YZA1Si12Cu2 | 413 | - | LM 6 | ADC1 | Al-Si12 Al-Si12Fe | 47100 |
| YL102 YZA1Sil2 | A413 | 305 | LM 20 | ADC1 | Al-Si12Cu Al-Si12CuFe | 44300 |
We want to exceed your expectations by delivering the most economical solution for your product manufacturing needs. We do this by constantly evolving what we do, and finding new ways to improve your current products, that will ultimately drive down costs and increase overall performance.
With our extensive experience in casting, forging, fabrication and machining, we can provide the best production method to manufacture your products. Welcome your inquiry us in any time.
FAQ
1.How soon can I get your response and quotation?
Usually, you will get our response within 12 hours, not later than
24 hours. Quotation provided within 48 hours.
2.Lead time for samples.
Usually 7-10 days, depending on the material, size, and surface
treatment.
3.Lead time for mass production.
Usually 14-35 days.
4.Is it possible to know how are my products going on without
visiting your company?
We will offer a detailed production schedule and send weekly
reports with digital pictures and videos which show the machining
progress.
5.Will my drawings be safe after sending them to you?
Yes, we will not release to the third party without your
permission.
