|
[China]
Trade Verify
Address: Yinzhou,Ningbo,China
Contact name:Michael
Ningbo Haijiang Machinery Co.,Ltd. |
|
Verified Suppliers
|
|
|
HJF-530 servo injection molding machine
Introduction:
1.Reliable plastic injection machine with servo motor ,equiped with servo motor , closed loop control for pressure and flow .Low noise,high precision and energy saving .
We design,manuafcture and supply our own brand of injection molding machine with clamping force ranged from 800kn to 30000kn, injection weight from 90g to 40000g, and can provide custom-built machine.
2.Inject all kinds of plastic parts, bottle preform, engineering plastic, UPVC, PVC, PE pipes fitting, pomponents for automotive, household, eletronics, telecommunication, ETC
Electronically Controlled Unit
1. CPU controller and display are independent and reliable.
2. A larger color LCD screen enhances clear display and support multi-language compatibility.
3. The control system also support remote monitor.In the event of a control problems,the machine can be connected to internet through a special interface.Inject service can realize remote fault diagnosis and maintenance.
4. A screen saver function extends the LCD life.
5. Ultra bright LED is provided for input and output point inspection.Proving convenient indication of the machine’s operation and machine service.
6. A data hardware lock is provided to prevent unauthorized people from effecting the machines performance.
7. Closed loop PID barrel temperature control.
8. Dust and waterproof control cabinets provide a neat and tidy enclosure all electric control components.
| SPECIFICATION | HJF530 | ||||
| Screw Type | A | B | C | D fruit basket | |
| Screw Diameter | Mm | 75 | 80 | 85 | 100 |
| Screw L/D Ration | L/D | 22.7 | 21 | 20 | 17.5 |
| Shot Size(Theoretical) | cm3 | 1727 | 1965 | 2218 | 2904 |
| Injection Weight(PS) | g | 1560 | 1788 | 2018 | 2614 |
| Injection Rate | g/s | 386 | 442 | 499 | 625 |
| Injection Pressure | MPa | 191 | 168 | 148 | 115 |
| Screw Speed | rpm | 130 | |||
| Clamping Force | KN | 5300 | |||
| Opening stroke | Mm | 820 | |||
| Space Between Tie Bars | mm | 820*820 | |||
| Max.Mold Height | mm | 810 | |||
| Min.Mold Height | mm | 330 | |||
| Ejector Stroke | mm | 240 | |||
| Ejector Tonnage | KN | 150 | |||
| Max.Pump Pressure | MPa | 16 | |||
| Pump Motor Power | KW | 45 | |||
| Heater power | KW | 31.4 | |||
| Machine Dimension(L*W*H) | M | 8.4*1.92*2.76 | |||
| Machine weight | T | 20 | |||
| Oil Tank Capacity | L | 900 | |||
Haijiang Machinery Main configuration
Standard machinery
| PLC | TECHMATION (TAIWAN) |
| Vane Pump | Albert (USA) |
| Directional Valve | Northman(TAIWAN) /Yuken(JAPAN)/Tokimec(JAPAN) |
| Proportional Valve | HNC (TAIWAN) |
| Electric Motor | Qianlima (CHINA ) |
| Contactor | Schneider(France) |
| Plasticizing Oil Motor | STF(CHINA) |
| Air Breaker | LS (KOREA) |
| Thermal Overload Relay | LS (KOREA)/Schneider(France) |
| Limit Switches | Omoron (JAPAN ) |
| Liner Position Sensors (Electric Ruler) | Minor (China) |
| Lubrication Pump | ChaoRun(China) |
Servo machinery
| PLC | PORCHESON (TAIWAN) |
| Directional Valve | Northman(TAIWAN) /Yuken(JAPAN)/Tokimec(JAPAN) |
| Air Breaker | LS (KOREA) |
| SSR(solid state relay) | Fotek(TAIWAN) |
| Plasticizing Oil Motor | STF(China) |
| Limit Switches | Omoron (JAPAN ) |
| Gear Pump | SUMITOMO (JAPAN) |
| Servo Driver | DELTA (TAIWAN) |
| Servo Sensor | ASHCROFT(GERMAN) |
| Servo Motor | Albert(USA)/Phase(ITALY) |
SPARE PARTS( FOR FREE)
| 1. Mold clamping with bolts: 8PCS, | 2. Nozzles: 1PCS, |
| 3. Toolbox: 1SET, | 4. Heating Ring: 2PCS, |
| 5. Lubrication Oil: 1 Bucket | 6. Limit Switch: 2PCS, |
| 7. Hexagon Wrench: 1SET, | 8. Thermocouple: 2PCS |
| 9. Seal Ring: 2PCS, | 10. Machine shockproof pads: 6PCS, |
| 11. Vise: 1PCS, | 12. Power socket for auxiliary machines: 2PCS, |
| 13. Wrench: 1PCS, | 14. Screwdriver: 2PCS, |
