|
[China]
Trade Verify
Address: Yinzhou,Ningbo,China
Contact name:Michael
Ningbo Haijiang Machinery Co.,Ltd. |
|
Verified Suppliers
|
|
|
HJF-1000 injection molding machine
Quick Detail:
Industrial Plastic Injection Molding Machine is for normal type plastic material injection, e.g. PC, PP, PE, Nylon, A.B.S.etc.This machine is mainly used to produce middle&big industrial parts, household appliances and other plastic products.
Competitive advantages:
+injection Units
High injection pressure , High injection speed
+HYDRAULIC SYSTEM
Fast respone, stable output
+Electronic Units
intelligent control unit
| SPECIFICATION | HJF-1000 | |||||||
| A | B | C | D
| |||||
| Screw diameter | mm | 95 | 105 | 115 | 125 | |||
| Screw L/D Ratio | L/D | 23 | 22 | 20 | 18.6 | |||
| Shot size(theoretical) | cm³ | 3613 | 4413 | 5294 | 6255 | |||
| Injection weight(PS) | g | 3251 | 3972 | 4765 | 5629 | |||
| Injection pressure | Mpa | 210 | 162 | 133 | 120 | |||
| Injection rate | g/s | 580 | 708 | 850 | 930 | |||
| Screw Speed | rpm | 115 | ||||||
| Clamp tonnage | KN | 10000 | ||||||
| Opening stroke | mm | 1100 | ||||||
| Space between the tie bars | mm | 1120*1120 | ||||||
| Max.Mold Height | mm | 1100 | ||||||
| Min.Mold Height | mm | 500 | ||||||
| Ejector stroke | mm | 350 | ||||||
| Ejector tonnage | KN | 200 | ||||||
| Max.pump pressure | Mpa | 16 | ||||||
| Pump motor power | KW | 45+45 | ||||||
| Heater power | KW | 58 | ||||||
| Machine dimension(L*W*H) | M | 12*2.8*3.14 | ||||||
| Machine weight | T | 45 | ||||||
| Oil tank capacity | L | 1800 | ||||||
Haijiang Machinery Main Configuration
| Controller | Arcuchi/Porchesion(50-290T)(China) |
| Techmation(360-3000T)(Taiwan) | |
| Vane pump | Albert(USA) |
| Proportional valve | HJK series Northman(TAIWAN) |
| HJK series Northman(TAIWAN) or TOKIMEC(Japan) | |
| Directional valve | HNC(TAIWAN) or YUKEN(Japan) |
| Electric motor | Dongguan(Guangdong) |
| contactor | Mager(50-290T)/Schneider(China)(360-3000T) |
| High pressure hose | Fute(Ningbo) |
| Five-star hydrauhu | Dandun(China)STAFFA(UK) |
| Air breaker | LS(Korea) |
| Thermal overland relay | Schneider(China) |
| Limit switch | Omoron(Japan) |
| Lubrication pump | Automatic |
| Servo motor | SUMITOMO(Japan) |
| Servo pump | DELTA(Taiwan) |
| Servo sensor | ASHCROFT(Germany) |
SPARE PARTS(FOR FREE)
| 1.mold clamping with bolts:8pcs | 2.Nozzle:1pc |
| 3.Toolbox:1set | 4.heating ring:2pcs |
| 5.lubrication oil:1 bucket | 6.limit switch:2pcs |
| 7.hexagon wrench:1set | 8.thermocouple:2pcs |
| 9.seal ring:2pcs | 10.machine foot pad:6pcs |
| 11.vise:1pc | 12.power socket for auxiliary machine:2pcs |
| 13.wrench:1pc | 14.screwdriver:2pcs |
