OUCO (Wuxi) Injection Molding Machinery Equipment Co., Ltd. |
Verified Suppliers
|
|
The 530-ton fruit frame injection molding machine designed and
produced by OUCO is a cost-effective injection molding machine.
We specially designed the template according to the characteristics
of the fruit frame mold. It not only makes the template stress
distribution uniform and the deformation small, but also can
effectively improve the precision of fruit frame products.
The machine adopts a high-efficiency large-diameter screw design,
which greatly improves the plasticizing capacity. Equipped with
high wear-resistant double alloy screw barrel, wear-resistant and
corrosion-resistant.
This series of injection molding machines are equipped with dual
servo motor power control, and the injection speed is fast. It can
effectively shorten the product molding cycle and improve
production efficiency.
Parameters
Model | 500T | |||
Screw Specifications | A | B | C | |
Screwdi ameter | mm | 70 | 75 | 85 |
Screw L/Dratio | 22 | 22 | 22 | |
Theoretical injection volume | cm3 | 1481 | 1700 | 2184 |
Shot weight (PS) | g | 1377 | 1581 | 2031 |
injection rate(Ps) | g/S | G03 | 693 | 890 |
Injection pressure | MPa | 209 | 182 | 142 |
Inject on stroke | mm | 385 | ||
Max. injection speed | mm/s | 166 | ||
Screw speed | r/min | 0-200 | ||
Sys. Pressure | MPa | 16 | ||
Pump Motor(Min-Max) | kW | 94 | ||
Displacement | ml/r | 125+125 | ||
number of Motors | PC | 2 | ||
Heater power | kW | 41 | ||
Number oftemp. control zones | 5+1 | |||
Clamping force | kN | 5000 | ||
Opening stroke | mm | 1000 | ||
Tie bar distance W×L | mm*mm | 860x760 | ||
Min. mold thickness | mm | 300 | ||
Max. mold thickness | mm | 800 | ||
Ejector stroke | mm | 210 | ||
Ejector force forward | kN | 110 | ||
Number of ejector bar | PC | 1+12 | ||
Oil tank capacity | L | 850 | ||
Machine dimensions(LxWxH) | m*m*m | 87x2.0x2.1 | ||
Machine weight | Ton | 19 |