Automatic PIR Sensor Light Switch Single Wire Human Induction AC 90 - 250 V

Automatic PIR Wall Switch Single Wire Control Human Induction AC 90 - 250 V

Infrared PIR Motion Sensor Switch

scope of application

Apply to the stairs aisle, fire escape, public walkway, anti-theft alarm, automatic switch control lighting etc.

the product features

1. With high sensitivity and reliability of pyroelectric infrared sensor, detect infrared spectral changes, human activity makes the switch automatically connected to the load, the time delay period, if someone within the effective induction activities, switch will continue to get through, until after the people left, delay shut down automatically load, realizes to the light, people walk light intelligent control function.
2. Adopt single wire control, automatic metering technology, factory Settings or strong light during the day not induction, and adjustable induction throughout the day.
3. The delay time is adjustable, also can adjust optional within the scope of delay by delay time of need.
4. The static working current is low, 10 years with less than 1 KWH, energy-saving effect is remarkable, long service life;With lights on 2 hours every day calculation, the static work for 22 hours a day, 3650 days (10 years) * (static) power consumption 0.012 W / 1000 W = 0.96 KWH.
5. Wide working voltage range design, more suitable for use in a working voltage of different countries, energy-saving lamps flicker-free phenomenon.
6. This switch design has overload protection, use more secure.

technical parameters

1. The scope of application: energy-saving lamps, fluorescent lamp, incandescent lamp, exhaust fan, etc all kinds of load
2. Working voltage: AC90-250 v (50/60 hz)
3. The induction Angle: 138 degree Angle
4. The induction distance: 6 m + 2 m
5. The load power: 1 w, 100 w
6. The static power consumption: 0.012 W or less
7. The environment temperature: - 20 ℃ to + 45 ℃
8. Light range: 6 to lux + 1 lux and full-day induction, factory Settings: 6 lux + 1 lux
Factory Settings: 40 seconds + 8 seconds

matters needing attention

1. The connection mode: press switch on the back of the indicator wiring, it is forbidden to use super load.
2. When installation, must by professional electrician operation, please follow the wiring installation specification;Switch and the light distance should be more than 0.5 meters.
3. Please do not charged operation, to be switched on again after the installation is complete.
4. When the load is not working, first check whether the circuit is correct and the load is normal, check the switch inside the fuse is damaged.
5. Thank you for your purchase of the China electronic product, the product warranty since the date for a year.