|
[China]
Trade Verify
Address: No. 6 Huanglongshan South Rd, Wuhan 430205, P.R.China
Contact name:Nancy Jiang
WUHAN GLOBAL SENSOR TECHNOLOGY CO., LTD. |
|
Verified Suppliers
|
|
|
Tiny Size Uncooled Infrared Camera Core 640x512 12um for UAV
Payloads
As a leading manufacturer of cooled uncooled infrared detectors
& thermal modules, Global Technology developes a tiny size and
lightweight infrared thermal imaging core iTL612R Pro, which
is the compact version of infrared camera core iTL612R.
Fully oriented for SWaP-C (size-weight-and- power-cost), the size
and weight of iTL612R Pro infrared camera core has already been at
the forefront in the industry.It is the best choice for customers who have restrict requirements
on size and weight when integrating their own drones.
Providing 640×512/12μm self-developed wafer-level infrared
detector, lens protection grade IP67, imaging and temperature
measurement version, and various SDK solutions, the iTL612R Pro
thermal module responds to space constraints with smaller size and
lighter weight, achieves longer battery life with lower power
consumption, overcomes integration problems in the consumer
electronics field, and provides more solutions for compact and
portable products.
It is specially developed for the field of Predictive Maintenance,
Photovoltaic Inspection, Environmental Protection, Scientific
Research, Aerial Photography, Police Investigation, Disaster Relief
& Rescue, Forest Fire Prevention, Urban Safety etc.
Compact & Lightweight Design
• Size: 17mm×17mm×22mm (with 9.1mm lens)
• Weight: 13g (with 9.1mm lens)
• Power consumption as low as 0.7W
Clear Image & Accurate Radiometry
• Brand new image process algorithm: NUC/3DNR/DNS/DRC/EE
• Support Windows/Linux/ARM SDK
• Support regional, point & isotherm temperature measurement
Various Interfaces for Easy Integration
• DVP/LVDS/USB2.0 interfaces, RAW/YUV image data output, serial
port control
| Model | iTL612R Pro |
| IR Detector Performance | |
| Sensitive Material | Vanadium Oxide |
| Resolution | 640×512 |
| Pixel Size | 12μm |
| Spectral Range | 8~14μm |
| Typical NETD | ≤40mk |
| Image Processing | |
| Frame Rate | 30Hz |
| Start-up Time | 5s |
| Digital Video | RAW/YUV/BT656 |
| Image Algorithm | Non-uniformity Correction (NUC) 3D Noise Reduction (3DNR) De-noise (DNS) Dynamic Range Compression (DRC) Edge Enhancement (EE) |
| Image Display | Black Hot/White Hot/Pseudo Color |
| PC Software | |
| ICC Software | Module Control & Video Display |
| Electrical Specifications | |
| Standard External Interface | 30Pin_HRS: DF40C-30DP-0.4V(51), (HRS, Male) |
| USB Expansion Board | Type-C |
| Communication Interface | RS232-TTL/USB2.0 |
| Digital Video Interface | CMOS8/USB2.0 |
| Supply Voltage | 4.0-5.0V V VDC |
| Typical Power Consumption | 0.7W |
| Temperature Measurement | |
| Operating Temperature Range | -10°C~+50°C |
| Temperature Measurement Range | -20°C~+150°C, 0°C~550°C; Support Customization and Expansion |
| Temperature Measurement Accuracy | Greater of ±2°C or ±2% (@23℃±3℃) |
| Regional Temperature Measurement | Support Maximum, Minimum and Average Value of the Output Regional Temperature |
| SDK | Support Windows/Linux/ARM; Achieve Video Stream Analysis and Conversion from Gray to Temperature |
| Physical Characteristics | |
| Size (mm) | 17×17×22 (With 9.1mm Lens) |
| Weight | 13g (With 9.1mm Lens) |
| Environmental Adaptability | |
| Operating Temperature | -40°C~+70°C |
| Storage Temperature | -45°C~+85°C |
| Humidity | 5%~95%, Non-condensing |
| Vibration | 5.35grms, 3 Axis |
| Shock | Half-sine Wave, 40g/11ms, 3 Axis 6 Direction |
| Certificates | ROHS2.0/REACH |
| Optics | |
| Optional Lens | Fixed Focus Athermal: 9.1mm |
The iTL612R Pro thermal imaging module can be integrated into UAV
payloads and wearable devices so that is widely used in fields
of Predictive Maintenance, Photovoltaic Inspection, Environmental
Protection, Scientific Research, Aerial Photography, Police
Investigation, Relief & Rescue, Forest Fire Prevention, Urban
Safety etc.
1. What is MCT/HgCdTe detector?
MCT, also called HgCdTe, refers to Mercury-Cadmium-Tellurid which is a chemical compound of cadmium telluride (CdTe) and mercury telluride (HgTe) and a common material in photodetectors. MCT/ HgCdTe detector is a photoconductive detector that operates at a cryogenic environment and can detect infrared radiation. It is more sensitive than the thermal sensors.
2. What is T2SL detector?
T2SL refers to Type-II Superlattice, which is an artificial material with alternating growth periodic heterojunction at nanometer size. It has high uniformity and superior optical property, such as large electron effective mass,large absorption coefficient and high quantum efficiency. Compared with MCT infrared detector, the T2SL infrared detector has good material uniformity, low cost, and similar performance to MCT infrared detector in medium and long wave band, but has great advantages in very long wave band.
