|
[China]
Trade Verify
Address: No.9 Kaixuan West Road ，Eeconomic Development Zone，Quzhou city，Zhejiang Province ，China
Contact name:Christina
Hangzhou Kaishan Air Compressor Co., Ltd |
|
Verified Suppliers
|
|
|
Free spare parts LG10.5-8G direct driven Stationery Rotary Screw Air Compressor
Specification
| Model | Capacity | Working Pressure | Weight | Dimension | Speed |
| LG-10.5/8 | 10.5m3/min | 8Bar | 1500kg | 1620x1230x1670mm | 4025 rpm |
Instruction:LG series pcp 100cfm 25hp 0.8Mpa stationary screw type machine air
compressor
LG Variable Speed air compressors provide maximum efficiency with
operating consis-tency. Unlike the traditional “Auto-dual” and
“Load/No load” control modes, LG VSD modulate the speed of the
drive motor in response to system demand. This results in greater
energy saving compared to a fixed speed compressor. Motor starting
power surges are greatly reduced by VSD features. Delivery of more
constant air pressure ex-tends valves life within the package.
Kaishan offers complete, high quality, low cost LG series rotary
screw air compressors.
They come configured as belt driven (7.5kw -18.5kw), optional gear
driven, direct driven(22kw –200kw) with discharge pressures from
0.7Mpa to 1.3Mpa. Water-cooled and air-cooled units are available.
PLC is a common feature for the LG series and is included in VSD
packages.
And can variable frequency.
Rotors are the key elements in producing compressed air efficiently.KAISHAN airends utilize a male 5 lobe rotordriving rotorand a 6 lobe female rotor(driven rotor).These state of the art Y profile rotors were introduced in the BK series compressor.
They have the following characteristics:
1.Larger rotors are designed to ensure the airends have slower
rotorspeeds to deliver compressed air more efficiently than smaller
airends
2.This translates into energy cost savings and a longer unit life.
3.The airends are guaranteed for 3 years. The rotor profile
minimizes leakage andthe tighter clearances achieved through state
of the art manufacturing processes results in higher.
4.efficiency and improved lubrication.
Features:
1. This series of mine air compressor can be used directly in the mine which is full of coal gas or methane gas. It can reduce the length of pipeline aspirated from the ground to the underground, reduce the pressure loss of long pipeline, and reduce the loss of gas because of the leakage of pipeline.
2. Adopts the German GHHRAND air end, which is with advanced configuration. Low fall between the 5:6 proportions of rotors attributes to small loss of circumfluence. The 4:6 proportions of rotors can improve the efficiency by 10% ~12%, and save 25% electric. It owns high precision and has the characteristic of running stability.
3. Adopts the air controlling system manufactured by Austria HOREBIGER Company, stable and reliable.
4. The load adjustment is between 0 and 100, and is able to automatically adjust the consumption of power along with the actual air flow.
5. Safe and reliable of use, and has the functions of explosion-proof, over-loading, short-circuit, electric leakage and so on. It has the protection equipment of giving an alarm when it is of overheat, blockage of air filter, blockage of oil filter and can automatically shutdown when it is overheat. It also has the capacity control, pressure switch and safety valve to avoid over pressure.
Motor driven stationary air compressor Specification.
| Mode | Pressure MPa | Capacity m3/min | Power kW | Dimension mm |
| LG-1.2/8 | 0.8 | 1.2 | 7.5 | 900×700×1040 |
| LG-1.0/10 | 1.0 | 1.0 | ||
| LG-0.8/13 | 1.3 | 0.8 | ||
| LG-1.7/7 | 0.7 | 1.7 | 11 | 1060×800×1230 |
| LG-1.7/8 | 0.8 | 1.7 | ||
| LG-1.5/10 | 1.0 | 1.5 | ||
| LG-1.2/13 | 1.3 | 1.2 | ||
| LG-2.4/7 | 0.7 | 2.4 | 15 | 1060×800×1230 |
| LG-2.4/8 | 0.8 | 2.4 | ||
| LG-2.2/10 | 1.0 | 2.2 | ||
| LG-1.7/13 | 1.3 | 1.7 | ||
| LG-3/8G | 0.8 | 3 | 18.5 | 1420×850×1110 |
| LG-3/7 | 0.7 | 3 | 1080×880×1415 | |
| LG-3/8 | 0.8 | 3 | ||
| LG-2.7/10 | 1.0 | 2.7 | ||
| LG-2.3/13 | 1.3 | 2.3 | ||
| LG-3.6/8G | 0.8 | 3.6 | 22 | 1420×850×1110 |
| LG-3.6/7 | 0.7 | 3.6 | 1080×880×1415 | |
| LG-3.6/8 | 0.8 | 3.6 | ||
| LG-3.2/10 | 1.0 | 3.2 | ||
| LG-5.2/7 | 0.7 | 5.2 | 30 | 1300×1100×1650 |
| LG-5/8 | 0.8 | 5 | ||
| LG-4.5/10 | 1.0 | 4.5 | ||
| LG-3.7/13 | 1.3 | 3.7 | ||
| LG-6.5/7G | 0.7 | 6.5 | 37 | 1630×910×1220 |
| LG-6.2/8G | 0.8 | 6.2 | ||
| LG-6.5/7 | 0.7 | 6.5 | 1300×1100×1650 | |
| LG-6.2/8 | 0.8 | 6.2 | ||
| LG-5.6/10 | 1.0 | 5.6 | ||
| LG-4.8/13 | 1.3 | 4.8 | ||
| LGB-6.0/8 | 0.8 | 6.0 | ||
| LGB-5.6/10 | 1.0 | 5.6 | ||
| LGB-4.8/13 | 1.3 | 4.8 | ||
| LG-7.4/7G | 0.7 | 7.4 | 45 | 1778×1000×1300 |
| LG-7.4/7 | 0.7 | 7.4 | 1300×1100×1650 | |
| LG-7.1/8 | 0.8 | 7.1 | ||
| LG-6.5/10 | 1.0 | 6.5 | ||
| LG-5.6/13 | 1.3 | 5.6 | ||
| LG-10.5/7G | 0.7 | 10.5 | 55 | 1950×1160×1550 |
| LG-10/8G | 0.8 | 10 | ||
| LG-7.5/13G | 1.3 | 7.5 | ||
| LG-8.7/10 | 1.0 | 8.7 | 1620×1230×1670 | |
| LG-7.5/13 | 1.3 | 7.5 | ||
| LGB-10/8 | 0.8 | 10 | 1500X1250X1566 | |
| LGB-8.5/10 | 1.0 | 8.5 | ||
| LG-13/8G | 0.7 | 13 | 75 | 2440×1160×1620 |
| LG-10/10G | 1.0 | 10 | ||
| LG-12/10G | 1.0 | 12 | ||
| LG-10/13 | 1.3 | 10 | 1580X1320X1646 | |
| LGB-13/8 | 0.8 | 13 | ||
| LGB-12/10 | 1.0 | 12 | ||
| LG-16.5/7G | 0.7 | 16.5 | 90 | 2560×1300×1620 |
| LG-16/8G | 0.8 | 16 | ||
| LG-14/10G | 1.0 | 14 | ||
| LG-12/13G | 1.3 | 12 | ||
| LG-20/7G | 0.7 | 20 | 110 | 2760×1340×1710 |
| LG-20/8G | 0.8 | 20 | ||
| LG-16/10G | 1.0 | 16 | ||
| LG-13/13G | 1.3 | 13 | ||
| LG-22/8G | 0.8 | 22 | 132 | 2760×1340×1710 |
| LG-20/10G | 1.0 | 20 | ||
| LG-16/13G | 1.3 | 16 | ||
| LG-28/7G | 0.7 | 28 | 160 | 2860×1510×1810 |
| LG-27/8G | 0.8 | 27 | ||
| LG-23/10G | 1.0 | 23 | ||
| LG-20/13G | 1.3 | 20 | ||
| LG-30/8G | 0.8 | 30 | 185 | 3400×2100×2100 |
| LG-21/13G | 1.3 | 21 | 2860×1510×1810 | |
| LG-35/8G | 0.8 | 35 | 200 | 3400×2100×2100 |
| LG-30/10G | 1.0 | 30 | ||
| LG-27/13G | 1.3 | 27 |
About KAISHAN COMPANY:
1- Established in 1990 ,Specialized in this line more than 20 years.
2- National Free-inspection Product
3-Have advanced machining centers, automatic production line shape and heat treatmentequipment etc 500 sets from the United Kingdom, United States, Japan, Germany.
4-Exported to Australia/ Mongolia/ Japan/ South-Africa etc.
