Hangzhou Kaishan Air Compressor Co., Ltd |
Verified Suppliers
|
|
KaiShan Brand Stationary LG-7.5/8 45KW 8Bar Screw Air Compressor For Spray Painting
The LG series compressors represent a giant leap in design and performance with each component designed for reliability and ease of maintenance. The compressor is manufactured in compliance internationa lstandards CE,IAF and others and designed asper the international quality standards. These new generation compressor significantly reduce operating costsand provide cost savings with fast return on investment.
Model No. | Capacity | Working pressure | Electrical power | Connector | Weight | Diemension |
m3/min | MPa | kw | kgs | mm | ||
LG-1.2/8 | 1.2 | 0.8 | 7.5 | G1 | 350 | 900*700*1040 |
LG-1.0/10 | 1.0 | 1.0 | ||||
LG-0.8/13 | 0.8 | 1.3 | ||||
LG-1.7/7 | 1.7 | 0.7 | 11 | G1 | 500 | 1060*800*1230 |
LG-1.7/8 | 1.7 | 0.8 | ||||
LG-1.5/10 | 1.5 | 1.0 | ||||
LG-1.2/13 | 1.2 | 1.3 | ||||
LG-2.4/7 | 2.4 | 0.7 | 15 | G1 | 550 | 1060*800*1230 |
LG-2.4/8 | 2.4 | 0.8 | ||||
LG-2.2/10 | 2.2 | 1.0 | ||||
LG-1.7/13 | 1.8 | 1.3 | ||||
LG-3/8G | 3.0 | 0.8 | 18.5 | G1 | 600 | 1420*850*1110 |
LG-3/7 | 3.0 | 0.7 | 650 | 1080*880*1415 | ||
LG-3/8 | 3.0 | 0.8 | ||||
LG-2.7/10 | 2.7 | 1.0 | ||||
LG-2.3/13 | 2.3 | 1.3 | ||||
LG-3.6/8G | 3.6 | 0.8 | 22 | G1 | 650 | 1420*850*1110 |
LG-3.6/7 | 3.6 | 0.7 | 700 | 1080*880*1415 | ||
LG-3.6/8 | 3.6 | 0.8 | ||||
LG-3.2/10 | 3.2 | 1.0 | ||||
LG-2.7/13 | 2.7 | 1.3 | ||||
LG-5.2/7 | 5.2 | 0.7 | 30 | G1½ | 1000 | 1300*1100*1650 |
LG-5/8 | 5.0 | 0.8 | ||||
LG-4.5/10 | 4.5 | 1.0 | ||||
LG-3.7/13 | 3.7 | 1.3 | ||||
LG-6.5/7G | 6.5 | 0.7 | 37 | G1½ | 1050 | 1600*970*1205 |
LG-6.5/7 | 6.5 | 0.7 | ||||
LG-6.2/8 | 6.2 | 0.8 | 1630*910*1220 | |||
LG-5.6/10 | 5.6 | 1.0 | 1300*1100*1650 | |||
LG-4.8/13 | 4.8 | 1.3 | ||||
LG-6.0/8 | 6.0 | 0.8 | ||||
LGB-5.6/10 | 5.6 | 1.0 | ||||
LGB-4.8/13 | 4.8 | 1.3 | ||||
LG-7.4/7G | 7.4 | 0.7 | 45.0 | G1½ | 1150 | 1778*1000*1300 |
LG-7.4/7 | 7.4 | 0.7 | 1300*1100*1660 | |||
LG-7.1/8 | 7.1 | 0.8 | ||||
LG-6.5/10 | 6.5 | 1.0 | ||||
LG-5.6/13 | 5.6 | 1.3 | ||||
LG-7.5/8 | 7.5 | 0.8 | ||||
LG-6.9/10 | 6.9 | 1.0 | ||||
LG-6/13 | 6.0 | 1.3 | ||||
LG-10.5/7G | 10.5 | 0.7 | 55 | G1½ | 1500 | 1950*1160*1550 |
LG-10/8G | 10.0 | 0.8 | ||||
LG-8.7/10 | 8.7 | 1.0 | 1620*1230*1670 | |||
LG-7.5/13 | 7.5 | 1.3 | ||||
LG-10/8 | 10 | 0.8 | 1500*1250*1566 | |||
LG-8.5/10 | 8.5 | 1 | ||||
LG-13/8G | 13 | 0.8 | 75 | G2 | 1900 | 2440*1160*1620 |
LG-10/10G | 10 | 1 | ||||
LG-12/10G | 12 | 1 | ||||
LG-10/13 | 10 | 1.3 | 1580*1320*1646 | |||
LG-13/8 | 13 | 0.8 | ||||
LG-14.5/7 | 14.5 | 0.7 | ||||
LG-12/10 | 12 | 1.2 | ||||
LG-16/8G | 16 | 0.8 | 90 | G2 | 2100 | 2650*1300*1620 |
LG-16.5/7G | 16.5 | 0.7 | ||||
LG-14/10G | 14 | 1 | ||||
LG-14.5/10 | 14.5 | 1 | ||||
LG-12/13G | 12 | 1.3 | ||||
LG-20/7G | 20 | 0.7 | 110 | DN65 | 3000 | 2760*1340*1710 |
LG-20/8G | 20 | 0.8 | ||||
LG-16/10G | 16 | 1 | ||||
1G-13/13G | 13 | 1.3 | ||||
LG-20/8 | 20 | 0.8 | 2400 | |||
LG-17/10 | 17 | 1 | ||||
LG-15/13 | 15 | 1.3 | ||||
LG-24/8 | 24 | 0.8 | 132 | DN65 | 3050 | 2760*1340*1710 |
LG-22/8G | 22 | 0.8 | ||||
LG-20/10G | 20 | 1 | ||||
LG-16/13G | 16 | 1.3 | ||||
LG-28/7G | 28 | 0.7 | 160 | DN65 | 3600 | 2860*1510*1810 |
LG-27/8G | 27 | 0.8 | ||||
LG-23/10G | 23 | 1 | ||||
LG-25/10 | 25 | 1 | ||||
LG-20/13G | 20 | 1.3 | ||||
LG-30/8G | 30 | 0.8 | 185 | DN65 | 4500 | 3400*2100*2100 |
LG-21/13G | 21 | 1.3 | 3700 | 2860*1510*1810 | ||
LG-35/8G | 35 | 0.8 | 200 | DN80 | 4500 | 3400*2100*2100 |
LG-30/10G | 30 | 1 | ||||
LG-27/13G | 27 | 1.3 | ||||
LG-44/8 | 44 | 0.8 | 220 | DN100 | 4800 | 3700*2221*2050 |
LG-46/8G | 46 | 0.8 | 250 | DN100 | 6000 | 3700*2200*2200 |
LG-38/10G | 38 | 1 | 6200 | 3900*2200*2200 | ||
LG-33/13G | 33 | 1.3 | 5800 | 3700*2200*2200 |
Our advantage
1.Air end
Larger rotors are designed to ensure the air ends have slower rotor
speeds to deliver compressed air more efficiently than smaller air
ends.
This translates into energy cost savings and a longer unit life.
The rotor profile minimizes leakage and the tighter clearances
achieved through state of the art manufacturing processes results
in higher efficiency and improved lubrication.
2.Drive Motor
IP54 rated, standard efficiency, IEC motors are used on every
kaishan compressor. Over sized cast iron conduit boxes make
connections easy. The industry best motor grease is used to protect
motor bearings, provide longer lubricant life, greater shear
stability and the best resistance to rust and corrosion.
3.Inlet Valve
The Inlet Valve is the major air flow control component in the
compressor unit.It controls air flow to the compressor,either by
opening, throttling, or closing completely in response to pressure
transducer controls.
4.Drive Coupling
The latest European designed spider couplings are used to guarantee
the reliability and transmission efficiency and provide vibration free power transmission for quiet and maintenance free
operation.
5.Oil Separation System
The three stage separation system, the result of extensive research
and development, supplies high quality compressed air. The
separation tank has two different separation stages: Centrifugal
and gravity. The third stage separation is provided by a high
performance, long life coalescent separator filter. This system
limits oil vapors carryover to below 3ppm.
6.Kerry Air Filter
Kaishan series compressors use the Kerry air filter which provides
filtration to less than 3 microns Ultra Web nanofiber technology.
This technology ensures clean, unrestriced airflow for optimal
compressor operation. It has 99.99% filtration efficiency and fully complies with ISO 5011 standards. Strategic air inlet port
positioning receives the coolest air as it enters the cabinet to
ensure superior volumetric efficiency.
7.Cooling System
Kaishan series compressors utilize a slient,efficient and easily
accessible cooling system.A wide radial fan produces greater static
pressure across the coolers at low rotational speed,assuring
considerable energy saving and low operating sound.