Active Member
|
[China]
Contact name:
SHANGHAI YANYE INDUSTRIAL EQUIPMENT CO.,LTD |
|
|
Industrial Cooling Coil water Cooling Coil Heat exchange Cooling Coils Evapco Cooling tower Coils BAC Cooling coils:
2.2 Advantages for cooling towers
1) Closed loop
Preventing the impurities into the system to block the cooling
tubes, soft water is adopted to avoid overheating caused by scaling
to the water pipes.
2) Automatic temperature control
Automatic start/stop spraying system to achieve effective control
on the temperature of cycled cooling water, the temperature of the
cooling water can be controlled below 40 ℃. With this function, the
water & energy cost is reduced to the lowest point with
intelligent control to the number of working fans and start &
stop of spray pump.
3) No need of water pool and cooling tower
Low cost, small space occupancy, easy installation and move with
the welder.
4) Automatic digital display of temperature control
Energy efficient and user friendly.
5) Cooling system structure
Galvanized iron beam.
| YZFL-780F Specifications |
| Heat Reject :780 kw |
| Gas Filling Rate :35 kg/minute |
| Power of fan :1× 4.0 kw |
| Blowing rate: 1× 65000 m3/h |
| Spray Pump’s Delivery Lift :10 m |
| Spray Pump’s Power : 2.2 kw |
| Spray Water Flow Rate : 44.7 m3/h |
| Drift Loss : 0.01% m3/h |
| Operation Work Pressure: 0.10—0.35 Mpa |
| Inet/ Outnet: 1*DN 100mm/ 1*DN 100mm |
| DN100:Liquid outlet (Please specify adopted screw standards) |
| DN100:Air inlet (Please specify adopted screw standards) |
| Compensation water pipe: DN 25 mm |
| Discharge pipe: DN 50 mm |
| Overflow pipe: DN 80 mm |
| Shipping Weight: 1860 kg |
| Operating Weight:2860kg |
| 2280mm×2300mm×3720mm (L*W*H) |
