|
[China]
Trade Verify
Address: Dongbao Industrial Park, Number 151, Jiangshi Road, Gongming, Bao'an District, Shenzhen 518106.
Contact name:AGsonic
AG Sonic Technology limited |
|
Verified Suppliers
|
|
|
Automatic Ultrasonic Cleaner 40 Khz Clean Cylinder Head And Automatic Transmission Housing Ultrasonic Cleaner
Large Industrial Carbon Ultrasonic Cleaner Car Motor Parts Cleaning Machine
Routine cleaning
Cleaning the ultrasonic cleaner and replacement of the cleaning solution is necessary at least daily or more frequently if solution soiled.
Why Use Automotive Ultrasonic Cleaner?
There are so many uses for an ultrasonic cleaner in an auto shop. Ultrasonic car parts cleaning saves time by eliminating the need for manual scrubbing of auto parts covered with grease, oil, and other lubricants. Besides freeing up time, the hazardous chemicals can be replaced with biodegradable soaps. Specific examples of items that are commonly cleaned by a benchtop ultrasonic cleaner include filters, shock absorber parts, power steering parts, pistons, valves, fuel injectors, bearings – just to name a few. Larger industrial-sized units can be used for carburetor ultrasonic cleaning and ultrasonic exhaust manifold cleaning, where cleaning action is needed deep within the network of passages. This large capacity also allows for ultrasonic crankshaft cleaning and ultrasonic cylinder block cleaning as well the means to clean multiple parts at once.
Basics and spcifictaion
| Model | T-1144S |
| Interior tank size: | 1200x1000x800 mm |
| Capacity: | 960liters; |
| Material: | Stainless steel 304 |
| Ultrasonic frequency: | 28khz |
| Transducers; | With144 pieces transducers; |
| Ultrasonic power | 7.2 KW |
| Generator power | 220V, 50/60HZ |
| Working voltage: | 380V 50HZ; |
| Warranty: | 1 year. |
Cylinder Heads And Engine Blocks Ultrasonic Cleaners
Automotive Ultrasonic Cleaners is primarily an aqueous tank systemthat uses ultrasonic energy to remove dirt, grease, oiland baked-on carbon from parts. Contaminants such aspaint, rust, glued-on gaskets, and heavy layers of bake don carbon can also be removed by ultrasonic cleaning but require more aggressive chemistries. Unlike someother cleaning processes, ultrasonic cleaning will notdamage intricate, lightweight, or easily damaged parts.
Our Ultrasonic cleaning process, can effectively clean the following components- Cylinder Heads And Engine Blocks And Aircraft Parts ,Aluminum castings, engine blocks, Carburetors, Cylinder Heads, Engines, Engine Components, Gear Boxes, Filters, Tubes and Valves.
AG Cylinder Heads And Engine Blocks ultrasonic cleaning machine are
revolutionizing cleaning methods and processes on the Valve Plates
, our Valve Plates And Aircraft Parts ultrasonic cleaning machine
can clean all kinds of automotive, aircraft, and marine engine
parts, ultrasonic technology for cleaning parts eliminates manual
labor while providing you with superior cleaning action, most parts
can be cleaned with environmentally friendly water-based solutions
Ultrasonic Cleaning - FAQ
What is the foil test?
Ensure that the tank is at the required operating temperature, has been degassed, and filled with the correct amount of fluid and cleaning solution.Then, using a piece of aluminium foil,suspend the foil in the tank. Turn on the ultrasonics and leave for approx ten minutes.
Remove the foil and inspect. If cavitation is occurring the foil should be perforated and wrinkled. Try this in different places in the tank to ensure cavitation is all over.
Foil following cavitation
Why is fluid temperature important?
Heat not only aids the degassing process, but it also enhances and speeds up the actual cleaning process.Additionally most detergents are designed to work best at elevated temperature.
Which cleaning solution should I use?
Technowash ltd has a large range of aqueous based detergents specifically designed for use with ultrasonic cleaning. Please contact us for more details.
How often should I change the cleaning solution?
Cleaning solution should be changed if there is a noticeable difference in cleaning results, or when the solution is visibly dirty.
What is the recommended cycle time?
Process times vary depending on the application and the level of contaminant. All Technowash ltd machines are supplied with fully adjustable process cycle timers.
