|
[China]
Trade Verify
Address: Dongbao Industrial Park, Number 151, Jiangshi Road, Gongming, Bao'an District, Shenzhen 518106.
Contact name:AGsonic
AG Sonic Technology limited |
|
Verified Suppliers
|
|
|
Arm Full-Automatic Cleaner For Oil Pump Cover Ultrasonic Cleaning Aluminum
Cleaning Process
1 ULTRASONIC CLEANING
Our powerful cavitation will loosen dirt on parts. Bath includes water and specific detergent (5-15%) for each application. Heating up to 90ºC increases overall performance.
2 WATER RINSE
Rinsing is as important as cleaning. It will remove detergent and remaining dirt from parts. Air bubbling jets increase rinsing effectiveness. Water must be keep clean, so active carbon filter is highly recommended.
3 ADDITIONAL WATER RINSE STAGES
Number of additional rinse steps in reverse cascade arrangement will be determined according to cleanliness level requirements. Use of pure demineralized water at final rinsing stage will allow best final results.
4 PARTS PROTECTION
Passivation agents bath will protect your parts against corrosion. A complete range of products is available depending on customer parts material and temporal protection range desired.
5 DRYING Hot air cyclone chamber quickly removes water from just cleaned parts, so they are ready to continue their manufacturing process. Proper thermal insulation ensures lowest electrical consumption.
Arm Full-Automatic ultrasonic Cleaner Specification
| Model | T-2048S |
| 1st Tank Volume | 175L |
| 2nd Tank -5anks Volume | 175L |
| First tank size | 700X500X500mm |
| Second -5th tank size | 700X500X500mm |
| Transducers | 48pcs 50W of every transducer |
| Ultrasonic Power | 2400W |
| Heating Power of Ultrasonic tank | 6000W |
| Heating Power of Drying tank | 750W |
| Frenquency | 28KHz/40KHz |
| Drying System | 1 set |
| Unit size | 1940*760*1100mm |
| Packing size | 2000*820*1220mm |
| Timer | 0~99 minutes adjustable |
| Heater | Room temperature~99℃ adjustable |
| Material | SUS 304 default, can be SUS 316 |
| Power Supply | AC 220V 3 phase ; AC 380V 3 phase |
| N.W. | 250G |
| G.W. | 280KG Wrapped by film in wooden case |
| Lead time | 18 working days |
| Warranty | 1 year warranty period, technique support all time |
| Certificates | CE, RoHS, FCC, SGS |
| Advantage | Filter the dirty water; keep the water clear in tank; lower the frequency of changing water |
Full automatic ultrasonic cleaning machine also called mechanical -arm ultrasonic cleaner , Through mechanical arm , to move the whole basket with parts entering into the specified process , Use the PLC intelligent control for whole machine , along with rotary , successivelly to finish ultrasonic cleaner, ultrasonic rinsing , ultrasonic pure water rinsing , moveable air cutting , hot air drying and colling down , will have 5 tanks to 16tanks , etc , After cooling ,manipulator will hoist the basket tot unloading station .Customized design available , according to the actual needs of customers,
Single mechnical arm or multiple mechanical arm
Function : To realize the automatic loading / unloading and transmission between tanks , thus for large labor cost saving and cleaning quantite highly increased .
AA. PLC & Touch screen auto control system,Single or multiple mechanical-arm type auto loading and unload device(such as the roller for loading/unloading), full closed for dustproof , with functions as ultrasonic,bubbling, vacuum clean,air cutting, drying, rustproof and advanced demisting system.
BB.Single manipulator or combination of multiple manipulators to
realize high requirement of cleaning;
Fully controlled PLC and operational interface with touch screen
for easy operation and control;
Automatic feeding and discharging station to accurately
re-assemble/disassemble working pieces;
Purification of drying tank and unique pre-treatment technology of
drying;
Functions of vacuum cleaning to ensure throughly cleaning;
Fully enclosed housing and exhausting system to ensure good working
environment.
