MENTEK Rapid Temperature Experiment Chamber Suitable For Aerospace
Products, Information Electronic Instruments
MENTEK ESS Chamber.pdf
The rapid temperature change test box is suitable for aerospace
products, information electronic instruments, materials, electrical
engineering, electronic products, and various electronic components
to test various performance indicators of products under the
condition of rapid temperature changes.
The rapid temperature change test box is suitable for aerospace
products, information electronic instrumentation, materials,
electrical engineering, electronic products, and various electronic
vital parts to test their performance indicators in a fast-changing
environment of high temperature and low temperature. The whole box
adopts an integral structure. Box structure
: The inside of the box is made of 1.0mm imported SUS3048 stainless
steel plate, the outside is made of 1.0mm cold-rolled steel plate
sprayed, and the insulation material is made of ultra-fine glass
insulation cotton.
3The door is sealed with double-layer silicone rubber sealing
material.
4 The observation window is made of multi-layer conductive film
tempered hollow glass, the size is 350x500mm. In order to prevent
the glass from frosting at low temperatures, a built-in special
safety voltage heating wire surrounds the heating belt. The supply
voltage is 36V, and there is a lighting lamp to provide
illumination for observation. .
5 There is a p50mm test hole with a plug on the side of the box.
The plug material is silicone rubber, low foaming, high and low
temperature resistance, and heat preservation. There is an air
conditioning cabinet at the back of the box studio, and a
humidifier is installed in it. , Evaporator, electric heater, fan,
fan volute and other equipment.
7 The temperature sensor is placed at the air outlet.
8 The air supply mode in the test chamber is the upper air supply
and the lower return air refrigeration system
Application
Thermal Cycling Test Chamber is widely used in following industry and it can be used as an
important reference for improving product quality.
- Electronic parts
- Home appliance
- Auto parts
- Aviation parts
- Metal
- Plastic,rubber
Technical Sheet
| Model | MESS-250 | MESS-500 | MESS-1000 | MESS-1500 | Custom |
| Interior Volume | 250L | 500L | 1000L | 800L | Accept |
| Interior Dimension(cm) | 70*70H*50 | 80*90H*70 | 100*100H*100 | 100*150H*100 | |
| Standard Load(Aluminum Ingots) | 5kg | 12kg | 25kg | 30kg | |
| Temp Change Rate(with load) | 5℃ ～20℃/m(Standard); 30/℃/m( Liquid Netrogen) |
| Temp Range | -70℃～+150℃ | -40℃～+150℃ |
| Temp Fluctuation | ±0.3℃～±0.5℃ | |
| Temp & Humidity Deviation | ±1℃～±2℃ | ±3％RH(＞75％RH);±5％RH(≤75％RH) (optional) |
| Standard configurations | 1 Window, 1 Cable port, 1 Lamp, 4 Casters, 1 Power cable, 2
Stainless steel shelves |
| Standard Documentations | quality certification,test report ,user operaion manual for machine
& controller |
| Safety devices | Electric leakage, fan overheat ,anti-dry ,compressor overheat &
overpressure,power supply undercurrent,overheat, overcurrent, phase
sequence, over-temperature protection devices |
Why MENTEK?
- 1) Highly flexible for customization: The biggest advantage with MTENK climatic chambers is that
they are highly flexible for customization. Every test follows a set of procedures as per the defined test
standards (ASTM, IEC, MIL, etc.) and sometimes a standard climatic
chamber might not be sufficient to conduct a particular test. Our
engineers understand this need of the industry well and offer the
highest level of customisation like design modification or
integration with other applications such as Climatic Chamber with
alititude integration, Climatic Chamber with Vibration
Integration(AGREE Chamber), etc.
- 2) Professionalism: China Leading brand climatic chamber manufacturer with over 20 years focus on environmental test chambers Industry since 1999. MENTEK Testing Equipment Co.,Ltd is a leading climatic chamber
manufacturer in China, specializing in manufacturing various
environmental chambers with superior quality and customer
service.We have professional factory management and development
team. The yearly turnout are 1,500 units.We are customer-tailored
solution expert in environmental chamber, provide excellent test
chambers & make expert solutions for customers.We provide
private custom service for each customer, and create their own
brand environment test chambers.
- 3) Fast Delivery: The products delivered to you within 7 days for
our stock items from clearance of payment. It will take 25-to-35
working days for custom made products or equipments that are not
available from stock.
We Supply you
- Climatic Chamber
- Environmental Chamber
- Temperature Chamber
- Humidity Chamber
- Walk-in Chamber
- Thermal Shock Chamber
- Thermal Cycling Chamber
- Lab Oven
- Vacuum Chamber
- Vibration Shaker
- Altitude Chamber
- Salt Spray Tester
- Tensile Test Machine
- Custom-designed Test Chamber
Looking for distributors worldwild.
We have been looking for qualified overseas distributors or dealers
to join our business together, and sincerely invite you to visit
our company and factory in Dongguan, China. If you are interested
in business for environmental chambers and have ability to install,
repair test chambers with your professional technician support,
please do not hesitate to contact us and join our sales team to
establish friendly business relationship based on mutual benefits.
Why Select MENTEK.pdf
