Home Companies Dongguan YiCun Intelligent Equipment Co.,Ltd

DN25 10HP Industrial Chilling Equipment For Battery Pack

Active Member

Contact Us

[China]

Address: Room 103,3#Block,No.3 Xiaolong Road,Yuanshanbei Village,Changping Town,Dongguan City.China

Contact name:Aiden Zeng

Dongguan YiCun Intelligent Equipment Co.,Ltd

DN25 10HP Industrial Chilling Equipment For Battery Pack

Country/Region	china
City & Province	dongguan guangdong

Product Details

10HP Specification -40~+80C Coolant Test System For New Energy Vehicle Battery Pack

Specification

Number	Item	Description
	Coolant temperature	℃～+80℃,adjustable
	Chiller size	D 1514×W 806×H 1768mm,Subject to final design (3D as shown below)
	Control model	Feed forward PID, model-free self-building algorithm, PLC controller
	Control accuracy	±0.5℃,Resolution 0.1℃
	Cooling capacity	≥7.5kW@25℃ (10HP)
	Heating capacity	≥9KW
	Temperature change rate	Heating and cooling speed ≥4℃/min(with no load)
	Coolant	60% Glycol +40% water(Volume ratio)
	Flow	adjustable,flow accuracy ±0.3L/min,resolution 0.01L/min
	Pressure	,control accuracy ±2Kpa,resolution 0.1Kpa
	Connector with battery/pack	Water inlet and outlet, 1 inlet and 1 outlet, inlet and outlet pressure and temperature detection, inlet flow detection
	Liquid tank	1 liquid tank, internal circulation of liquid
	Power	About 17.6KW(subjected to final design)
	Cooling mode	Ail cooled
	Diameter	DN 25

Why Select MENTEK.pdf

Function:

High-low temperature coolant test system for batterys is specially
designed for thermal and hydrodynamic test on liquit-cooling
battery pack . According to the demands of battery performance test
for new energy vehicles,Chiller is equipped with a variety of high
performance sensors, with this system, you can:
A. Test flow rate, pressure and temperature of the battery pack
coolant
B. Provide the temperature simulation, the pressure simulation and
the flow simulation of the temperature range.
C. Support RS485, CAN and other communication protocol,which make
the communication with host computer or charging machine available.
D. Various working condition for the battery reliability and
stability test can be simulated thanks to the multi-PID which
controls the heater and refrigeration units.

Main Features
1.Wide temperature control range: -40 ℃ - 85 ℃, 0.1 ℃ for minimum
temperature fluctuation
2.Direct cooling technology is used. Compressor takes part in the
whole temperature control circulation, heating and cooling are
together.
3.Heaters are equipped to pre-heat battery pack
4.VF high temperature circulation pump is used to avoid leakage
5.Flow and pressure can be set by equipping sensor and
inlet&outlet pressure gauges.
6.Equipped with equal-square valve to test the cooling channel
inner resistance of motors.
 
Application
 Take away the waste heat produced in the process of battery
charging/discharging test.
 Battery pack heating test
 High temperature test, to test battery pack’s high temperature
performance and stability.
 Thermal performance test, to test the efficiency of battery pack
cooling system.
 Variable temperature test, to test the battery’s performance
under different temperature.
 Pressure drop test and flow resistance test, to test the inner
resistance of battery pack.
 Pressure proof test, to test the sealing property of the battery
pack cooling tunnel.

Hot Products

MENTEK Rapid Temperature Experiment Chamber The Gate Is Sealed With Double-Layer Silicone Rubber Sealing Material.

MENTEK Rapid Temperature Experiment Chamber The Gate Is Sealed With Double-Layer Silicone Rubber ...

MENTEK Rapid Temperature Experiment Chamber Suitable For Aerospace Products, Information Electronic Instruments

MENTEK Rapid Temperature Experiment Chamber Suitable For Aerospace Products, Information Electronic ...

Laboratory 408L SUS304 Constant Temperature Humidity Chamber

Programmable laboratory equipments/lab/constant test chamber temperature and humidity made in China ...

220VAC 408L High And Low Temperature Test Chamber

Automatic Programmable Simulation High and Low Temperature Two ZonesThermal Shock Test Chamber Hot...

Two Zones 98％RH 408L Thermal Shock Test Chamber

MENTEK Two Zones Fast Temperature Change Environmental Cycling Thermal Shock Test Chamber Programmab...

GB/T5170.5-2008 800L Temperature Humidity Test Chamber

Programmable Environmental test chamber with Humidity and temperature control It is used to test the ...

Related Products