Function:
It can adjust the various parameters according to the testing
requirements of drive motors to conduct thermal test on motors and
the controllers under room temperature or higher.
According to the cooling type of motors, oil or water is used as
coolant.
Oil coolant type which uses oil of automatic transmission tank(Dexron-III, Dexron-VI, Mercon V, Mercon VI, ZF) as circulation medium for testing oil-cooled drive motors to directly pump cooled oil of automatic transmission tank into the motors so that it achieves the cooling of motors. The way of cooling has a good effect and temperature control accuracy and it will not submerge motor air gap.
Water coolant type which uses demonized water or ethylene glycol solution as circulation medium for testing water-cooled drive motors according to motor testing demands. It pumps cooling medium into cooling water jackets or water pipe of motors to achieve the temperature control of motors.
Main Features
1. -40 – 120 ℃ wide range of temperature control, 0.1 ℃ for minimum temperature flunctuation
2. Accurate flow control: variable frequency drive flow control, arbitrary setting of flow output, 0.2 L/min for minimum fluctuation.
3. Thanks to direct cooling technology, the compressor take part in temperature control in the whole circulation, heating and cooling together.
4. Avoid leakage of coolant under high temperature by using silicon carbide for circulation pump and by using graphite sealing material for pipeline.
5. Multi-point temperature monitor in the circulation cycle.
6. Precise pressure gauge is used for the real time feedback.
7. Equipped with equal-square valve to test the cooling channel inner resistance of motors.
8. High temperature destruction test , to test the demagnetization property and the lubrication reliability of motors under high temperature.
1. -40 – 120 ℃ wide range of temperature control, 0.1 ℃ for minimum temperature flunctuation
2. Accurate flow control: variable frequency drive flow control, arbitrary setting of flow output, 0.2 L/min for minimum fluctuation.
3. Thanks to direct cooling technology, the compressor take part in temperature control in the whole circulation, heating and cooling together.
4. Avoid leakage of coolant under high temperature by using silicon carbide for circulation pump and by using graphite sealing material for pipeline.
5. Multi-point temperature monitor in the circulation cycle.
6. Precise pressure gauge is used for the real time feedback.
7. Equipped with equal-square valve to test the cooling channel inner resistance of motors.
8. High temperature destruction test , to test the demagnetization property and the lubrication reliability of motors under high temperature.
Application
l High temperature start-up test, to test motor’s low-power performance under high temperature.
l High temperature running test, to test motor’s long-time running performance under high temperature.
l Thermal performance test, to test the heat dissipation of motor’s cooling system.
l Variable temperature test, to test motor’s performance under different temperatures.
l Thermal fatigue test, to test the reliability and stability of motor after long-time running.
l Pressure drop test and flow resistance test, to test the inner resistance of motor coolant.
l Pressure proof test, to test the sealing property of the motor cooling tunnel.
Technical Specfication
