Active Member
|
[China]
Address: Room 703, Land Center T2, YanZhan Road, No.1111, QuJiang New District, Xi'an China
Contact name:Rachel Zhang
Xi'an Longjoy Foreign Trade Co.,Ltd |
|
|
The pipe cap, also known as the head, is a pipe fitting welded on the pipe end or installed on the external thread of the pipe end to cap the pipe. It is used to close the pipeline and has the same function as the pipe plug. Generally, the cap is convex, including hemispherical cap, elliptical cap, dished cap and spherical cap. There are about seventeen kinds of pipe caps according to the pressure rating, and the standard pressure rating of pipes. The grades include sch5s, sch10s, sch10, sch20, sch30, sch40s, STD, sch40, sch60, sch80s, XS: sch80, schh100, sch120, sch140, sch160, XXS; the most commonly used ones are STD and XS.
1. The head is a kind of pressure vessel boiler accessories, which is generally used at both ends of the pressure vessel or at the end of the pipeline, so it is also called the head.
2. The pipe cap is a pipe fitting welded on the pipe end or installed on the external thread of the pipe end to cap the pipe and seal the pipe.
3. The head and the cap are very similar in appearance. The difference is mainly in the size of the inner diameter and the scope of application.
4. The pipe cap is only the plug of the pipe. If it exceeds DN300, the head shall be used instead. If it is under pressure, the strength shall be checked.
5. The size of the pipe cap is relatively small, so it can be forged; the size of the head is relatively large, which is usually pressed with steel plate.
6. The pipe cap is generally used for the end of the pipe, and the head is used for the upper and lower parts of the container equipment or the left and right ends.
7. Most of the pipe caps are made of stainless steel with small size and can be forged; the head size is larger and is usually pressed with steel plate.
304L 1.5 Threaded Cap Stainless Steel Pipe Fittings data sheet
| Nominal Diameter | The Length of Coupling and Cap | Outside Diameter | End Wall Thickness | Length of Thread | |||||||
| E | F | D | Cmin | ||||||||
| DN | NPS | 3000LB | 6000LB | 3000LB | 6000LB | 3000LB | 6000LB | 3000LB | 6000LB | B | L2 |
| Sch160 | XXS | Sch160 | XXS | Sch160 | XXS | Sch160 | XXS | ||||
| 6 | 1/8 | 32 | 32 | 19 | - | 16 | 22 | 5.0 | - | 6.5 | 6.5 |
| 8 | 1/4 | 35 | 35 | 25 | 27 | 19 | 25 | 5.0 | 6.5 | 8.0 | 10.0 |
| 10 | 3/8 | 38 | 38 | 25 | 27 | 22 | 32 | 5.0 | 6.5 | 9.0 | 10.5 |
| 15 | 1/2 | 48 | 48 | 32 | 33 | 29 | 38 | 6.5 | 8.0 | 11.0 | 13.5 |
| 20 | 3/4 | 51 | 51 | 37 | 38 | 35 | 44 | 6.5 | 8.0 | 12.5 | 14.0 |
| 25 | 1 | 60 | 60 | 41 | 43 | 44 | 57 | 9.5 | 11.0 | 14.5 | 17.5 |
| 32 | 1.1/4 | 67 | 67 | 44 | 46 | 57 | 64 | 9.5 | 11.0 | 17.0 | 18.0 |
| 40 | 1.1/2 | 76 | 76 | 44 | 48 | 64 | 76 | 11.0 | 12.5 | 18.0 | 18.5 |
| 50 | 2 | 86 | 86 | 48 | 51 | 76 | 92 | 12.5 | 16.0 | 19.0 | 19.0 |
| 65 | 2.1/2 | 92 | 92 | 60 | 64 | 92 | 108 | 16.0 | 19.0 | 23.5 | 29.0 |
| 80 | 3 | 108 | 108 | 65 | 68 | 108 | 127 | 19.0 | 22.0 | 26.0 | 30.5 |
| 100 | 4 | 121 | 121 | 68 | 75 | 140 | 159 | 22.0 | 28.5 | 27.5 | 33.0 |
1. Stainless steel threaded pipe cap is a kind of sanitary and non-toxic green building material. The surface and pipe joint are pickled and passivated.
2. The corrosion resistance of stainless steel pipe cap is improved by increasing the thickness of chromium rich oxide layer.
3. Performance characteristics of stainless steel pipe cap: light plastic; strong chemical stability; good corrosion resistance; excellent electrical insulation.
4. low thermal conductivity; silencing, damping effect; foam microporous; air tightness; excellent insulation, sound insulation and impact resistance.
5. Safe and non-toxic, suitable for families, especially pure drinking water pipeline system.
It is mainly used in water, beverage, beer, food, petrochemical, nuclear power, machinery, equipment, chemical fertilizer, shipbuilding, waterproof treatment, pipeline, etc.
Plastic bubble bag package b.Wove bag package
c.Pallet d. Customized
Delivery time
Our 304L 1.5 Threaded Cap Stainless Steel Pipe Fittings factory have high ability for production, the delivery time is 45days for small quantity, or if you are hurry for that, we can arrange and meet your shipping date.
