Xi'an Longjoy Foreign Trade Co.,Ltd |
HDPE hot-melt injection butt joint tee with the same diameter is a
pipe fitting and pipe connector, which is used at the branch pipe
of the main pipe.Equal tee is a kind of tee. There are general equal tee and
reducing tee. It is named because the three ends can be connected
with the pipe.
HDPE hot-melt butt joint tee is a molded tee. Its connection form
is to directly butt joint the tee with the plastic pipe.The main manufacturing standard of HDPE butt tee is hg20539-92,
iso161.Simple classification of wear-resistant PE butt welded tee pipe
fittings:
According to the pipe diameter, there are generally equal diameter
tee and reducing tee.According to the direction of branch pipe, there are straight tee
and inclined tee.According to the materials, there are PP, PE, PPH, etcAccording to the connection mode, there are butt welding tee,
socket tee and hot-melt socket tee.
Material: Imported PE100 or PE80
Specifications: T20,T25,T32,T40,T50,T63,T75
Usage: Convey Water,Sanitary Construction
It can resist the corrosion of many kinds of chemical media and has
excellent chemical resistance.The presence of chemicals in the soil will not have any degradation
effect on the pipeline.Polyethylene pipes containing 2-2.5% uniformly distributed carbon
black can be stored outdoors in the open without damage due to
ultraviolet radiation.
The comparative test of wear resistance between HDPE injection butt
tee and steel pipe shows that the wear resistance of HDPE pipe is 4
times of that of steel pipe.It has longer service life and better economy.HDPE injection butt tee has a smooth inner surface with Manning
coefficient of 0.009.
Smooth surface and non adhesion ensure that HDPE pipes have higher
transport capacity of traditional pipes.At the same time, it also
reduces the pressure loss and water transmission energy consumption
of the pipeline.HDPE tee is lighter than galvanized pipe fittings,
stainless steel pipe fittings and carbon steel pipe fittings.
It is easy to handle and install, with lower labor and equipment
requirements and greatly reduced engineering installation costs.
Hot melt injection butt straight tee is widely used in
petrochemical, oil and gas, liquefied gas and other gas pipelines.At the same time, it is also used in the construction and
maintenance of chemical fertilizer, power plant, nuclear power,
shipbuilding, food hygiene and other industries.
In the industry, the pressure of this kind of HDPE tee pipe is
higher, and the maximum pressure can reach 600 kg.In life, the pressure of water pipe is relatively low, generally 16
kg.
Butt Equal Tee HDPE Industrial Steel Pipe Fittings technical data sheet as below:
Specifications | D | d | I | L | H | PCs. / box |
Φ75 | 75 | 61.4 | 70 | 260 | 60 | - |
Φ90 | 90 | 73.6 | 79 | 293 | 146.5 | 16 |
Φ110 | 110 | 90 | 82 | 324 | 162 | 12 |
Φ125 | 1258 | 103 | 87 | - | - | - |
Φ160 | 160 | 130.8 | 98 | 411 | 205.5 | - |
Φ200 | 200 | 162.6 | 106.5 | 330.5 | 435 | - |
a. Plastic bubble bag package b.Wove bag package c.Pallet d. Customized.
Our Steel flat factory have high ability for production, the delivery time is 45days for small quantity, or if you are hurry for that, we can arrange and meet your shipping date.