Active Member
|
[China]
Address: Room 703, Land Center T2, YanZhan Road, No.1111, QuJiang New District, Xi'an China
Contact name:Rachel Zhang
Xi'an Longjoy Foreign Trade Co.,Ltd |
|
|
The Cross tee can be divided into equal diameter and reducing diameter. The nozzle ends of the equal diameter Cross tee are the same size. The main nozzle size of the reducing Cross tee is the same, and the nozzle size of the branch pipe is smaller than that of the main pipe. A cross is a pipe fitting used at the branch of a pipe. As for the seamless pipe used to make the cross, there are two commonly used processes: hydraulic bulging and hot pressing. The hydraulic bulging process of the cross can be formed in one time with high production efficiency; the wall thickness of the main pipe and shoulder of the cross is increased.
Due to the large tonnage of equipment required for the hydraulic bulging process of seamless cross, it is mainly used for the manufacture of standard wall thickness cross less than dn400. The applicable forming materials are mainly low carbon steel with relatively low cold work hardening tendency. Different from hydraulic bulging, the metal of hot pressed cross branch pipe is compensated by the radial movement of tube blank, so it is also called radial compensation process. Due to the adoption of pressing four joints after heating, the tonnage of equipment needed for material forming is reduced. Hot pressed cross has wide adaptability to materials, and it is usually used for cross with large diameter and thick pipe wall.
The inner wall of socket welding cross is often corroded. It should be inspected and treated well to ensure that socket welding cross has good application characteristics and value. After putrefaction, the wall of socket welded cross becomes thinner, showing local pits and pockmarks. It needs to be handled and maintained according to specific methods. Carbon steel cross generally contains a small amount of silicon, manganese, sulfur and phosphorus in addition to carbon. According to its use, carbon steel can be divided into three categories: carbon structural steel, carbon tool steel and free cutting structural steel. Carbon structural steel is divided into building structural steel and machine manufacturing structural steel.
Standard: ,Q235A,ASTM A234,ASTM A105
Material: carbon steel
Size range: DN 15x15x15-50x50x50
Surface treatment: anti-oil; anti-painting
| Nominal Diameter | Outside Diameter | Center to End | |||||
| D1 | D2 | ||||||
| DN | NPS | Series A | Series B | Series A | Series B | C | M |
| 15x15x15 | 1/2x1/2x1/2 | 21.3 | 18 | 21.3 | 18 | 25 | 25 |
| 15x15x10 | 1/2x1/2x3/8 | 21.3 | 18 | 17.3 | 14 | 25 | 25 |
| 15x15x8 | 1/2x1/2x1/4 | 21.3 | 18 | 13.7 | 10 | 25 | 25 |
| 20x20x20 | 3/4 x 3/4 x 3/4 | 26.9 | 25 | 26.9 | 25 | 29 | 29 |
| 20x20x15 | 3/4 x 3/4 x 1/2 | 26.9 | 25 | 21.3 | 18 | 29 | 29 |
| 20x20x10 | 3/4 x 3/4 x 3/8 | 26.9 | 25 | 17.3 | 14 | 29 | 29 |
| 25x25x25 | 1x1x1 | 33.7 | 32 | 33.7 | 32 | 38 | 38 |
| 25x25x20 | 1x 1x3/4 | 33.7 | 32 | 26.9 | 25 | 38 | 38 |
| 25x25x15 | 1x1x1/2 | 33.7 | 32 | 21.3 | 18 | 38 | 38 |
| 32x32x32 | 1.1/4x1.1/4x1.1/4 | 42.4 | 38 | 42.4 | 38 | 48 | 48 |
| 32x32x25 | 1.1/4x1.1/4x1 | 42.4 | 38 | 33.7 | 32 | 48 | 48 |
| 32x32x20 | 1.1/4x1.1/4x3/4 | 42.4 | 38 | 26.9 | 25 | 48 | 48 |
| 32x32x15 | 1.1/4x1.1/4x1/2 | 42.4 | 38 | 21.3 | 18 | 48 | 48 |
| 40x40x40 | 1.1/2x1.1/2x1.1/2 | 48.3 | 45 | 48.3 | 45 | 57 | 57 |
| 40x40x32 | 1.1/2x1.1/2x1.1/4 | 48.3 | 45 | 42.4 | 38 | 57 | 57 |
| 40x40x25 | 1.1/2x1.1/2x1 | 48.3 | 45 | 33.7 | 32 | 57 | 57 |
| 40x40x20 | 1.1/2x1.1/2x3/4 | 48.3 | 45 | 26.9 | 25 | 57 | 57 |
| 40x40x15 | 1.1/2x1.1/2x1/2 | 48.3 | 45 | 21.3 | 18 | 57 | 57 |
| 50x50x50 | 2x2x2 | 60.3 | 57 | 60.3 | 57 | 64 | 64 |
| 50x50x40 | 2x2x1.1/2 | 60.3 | 57 | 48.3 | 45 | 64 | 60 |
| 50x50x32 | 2x2x1.1/4 | 60.3 | 57 | 42.4 | 38 | 64 | 57 |
| 50x50x25 | 2x2x1 | 60.3 | 57 | 33.7 | 32 | 64 | 51 |
| 50x50x20 | 2x2x3/4 | 60.3 | 57 | 26.9 | 25 | 64 | 44 |
1, The surface treatment of carbon steel cross includes sand blasting, rolling, pickling and polishing. It is suitable for petroleum, chemical, electric power, metallurgy, ship, machinery and other industries.
2, It is widely used in chemical industry, petroleum, electric power, pharmacy, beer, food, dairy beverage, cosmetics and various engineering supporting pipelines all over the world.
a. Plastic bubble bag package b.Wove bag package c.Pallet d. Customized
Our factory have high ability for production, the delivery time is 45days for small quantity, or if you are hurry for that, we can arrange and meet your shipping date.
