6Ton High Pressure Working Coal Hot Water Boiler For Center Heating
1. The boiler shall adopt double drum, monolayer arrangement,
compact structure, as well as large heating surfaces which are more
10% than those of same kinds of products, featuring the following
advantages such as sufficient output, safe and reliable operation
,short construction period, and low installation cost ect.
2. The design of cyclone reburning chamber in furnace resulted in
the decrease of dust contained in the flue gas .At the same time,
incandescent carbon black particles shall burn further, enhancing
the boiler thermal efficiency, and decreasing gas blackness ,as a
result, the gas emission concentration shall meet the requirements
of grade A environmental protection area.
3. The grate shall employ the technology patent of small roller
structure, boundary grate and so on. Improving the operation
reliability of the boiler.
4. Since the adoption of technology patent for the sealed wind
chamber and bilateral grate air register, and the application of
machining cone seal structure to grate adjusting air equipment, the
sensitivity of the grate shall be improved.
5. The boiler was awarded the following titles: first class
products of mechanical and electrical department, excellent
energy-saving products promoted by state, excellent energy-saving
products of Henan
province.
6. According to the customers’ requirements, the layering burn
device and other energy saving equipments,implementedinstate, shall
be matched.
Boiler Model | Rated capacity | Rated pressure | Feed water temperature | Steam temperature | Design efficiency | Main part weight |
t/h | MPa | ℃ | ℃ | % | Ton |
DZL1-1.0-AII | 1 | 1 | 20 | 184 | 80 | 14.2 |
DZL2-1.25-AII | 2 | 1.25 | 20 | 194 | 80 | 23.2 |
DZL4-1.25-AII | 4 | 1.25 | 60 | 194 | 80 | 28 |
DZL6-1.25-AII | 6 | 1.25 | 60 | 194 | 80 | 47.6 |
DZL10-1.25-AII | 10 | 1.25 | 105 | 194 | 80 | 56 |
DZL15-1.25-AII | 15 | 1.25 | 105 | 194 | 81 | 18.8 |
DZL20-1.25-AII | 20 | 1.25 | 105 | 194 | 81 | 19.1 |
DZL30-1.25-AII | 30 | 1.25 | 105 | 194 | 81 | 25.6 |
DZL40-1.25-AII | 40 | 1.25 | 105 | 194 | 81 | 19.68 |
Customer visit
Every time the customer comes to visit the factory, Our leaders
will accompany the customer to visit the entire process, and at any
time to answer questions from customers in the process of the
visiting.And then after a visit to the factory, we will have a
group photo with the customer.