Henan Yuanda Boiler Co., Ltd. |
|
Asphalt Mixing Plant Used Thermal Oil Heater Boiler For Heating Bitumen
General Introduction
YY (Q) W series thermal oil boiler is a kind of boiler which uses
gas(oil) as fuel ,thermic oil as medium, hot oil circulation pump
to make the medium to forced circulation, deliver the heat to
heating need equipments and then go back to the heating furnace.It
can obtain a high operating temperature at low pressure and
can do high-precision control on the medium.
This series boiler has compact structure. The heating area is
constituted by close-knit coil pipes from inside to outside.Inside
coil pipes are the radiation heating surface, and the outer surface
of inside coil pipes and outside coil pipes form a convection
heating surface.Fuel burn fully in the combustion chamber, the
radiation heating surface absorb most heat, and then high
temperature flue gas goes into convection heating surface to
exchange heat, then go into the air preheater (or waste heat
boiler) to heat the required (or water).at last, the low
temperature flue gas discharges to the aerosphere through the
chimney.
Technical parameter table of Thermal oil heater boiler
Item | Unit | Data | |
Rated capacity | KW(kcal) | 1400KW(1200,000kcal) | |
Design pressure | Mpa | 0.8Mpa | |
Hydrostatictest | Mpa | 1.2 | |
Rated output temperature | °C | 280 | |
Rated return temperature | °C | 250 | |
Heat carrier circulation flow capacity | m³/h | 74.696 | |
Heating area | Radiative heating area | ㎡ | 7.797 |
Convection tube heating area | ㎡ | 45.29 | |
Heating area of economizer | ㎡ | 25.749 | |
Design efficiency(heavy oil fired) | % | 92.65 | |
Exhaust temperature(heavy oil fired) | °C | 123.56 | |
Fuel consumption (heavy oil fired) | kg/h | 131.8 | |
Heat carrier medium capacity in furnace | m³ | 1.2 | |
Medium flow speed in radiation area | m/s | 2.54 | |
Medium flow speed in convection area | m/s | 2.54 | |
Weight | Ton | 4 | |
Dimension | mm | 3710*1524*2150 | |
This is only the technical datasheet of our 1400kw(1200,000kcal)thermal oil boiler. For other models,please contact us for details. |
Thermal oil heater advantages
1.It is easy and convenient to install the boiler,only setting the
boiler on the foundation.
2.Heating surface is formed by round coilers,sufficient
arrangement,reducing thermal load of tubes surface to ensure
safety.
3.Furnace dimensions is matching with the combustion flame,positive
pressure combustion,high radiation heat exchange efficiency.
4.Boiler structure is compact,saving the floor area of boiler room.
5.An air pre-heater or heat recovery boiler is placed behind the
boiler to improve the thermal efficiency.
Application industries
1. Chemical industry
2. In the fat industry
3. In the food industry
4. Textile printing and dyeing industry
5. Medical industry
6. Synthetic fiber industry
7. Paper industry
8. Plastic and rubber industry
9. Wood processing industry
10. Building materials industry
11. Fat and paint industry
12. Automotive Manufacturing
13. Soap detergent industry
14. Tar processing industry
15. Road construction project