Honeywell dc to 60 Hz 51304754-150 MC-PAIH03 16 Inputs High Level
Analog Input Processor
Manufacturer : Honeywell
Product No. : 51304754-150
Product type : ??-PAIH03 High Level Analog Input Processor-16
Inputs
FTA Models: MU-TAIH02, TAIH12, TAIH52, TAIH03, TAIH13, TAIH23,
TAIH53, TAIH22, TAIH62
Input Type: Voltage, current (2-wire or self-powered transmitters)
Input Channels : 16 differential input channels
Common Mode Rejection Ratio, dc to 60 Hz (500 source imbalance): 70
dB
Common Mode Voltage, dc to 60 Hz(1): -6 to +5 V peak
A/D Converter Resolution: 16 bits (14 bits used)
Input Range 0 to 5 V, 1 to 5 V, 0.4 to 2 V, 4-20 mA (through 250 )
Normal Mode Rejection Ratio, at 60 Hz: 32 dB
Normal Mode Filter Response : Single-pole RC, -3 dB @ 1 Hz
Maximum Normal Mode Input(differential inputs, no damage): ± 30
Volts
Crosstalk, dc to 60 Hz(channel-to-channel): 60 dB
Input Impedance (Voltage Inputs): > 10 M powered
Maximum Input Voltage(any input referenced to common, no damage): ±
30 Volts
Input Scan Rate: 4 samples per second per channel.All channels
sampled within a 250 ms window
Hardware Accuracy (@ CMV = 0 V): ± 0.075% full-scale (23.5°± 2°C),
± 0.15% full-scale (0 to 50°C)
Surge withstand capability (Common mode) ANSI/IEEE C37.90.1-1978
Shipping Weight : 3 Kg
SIMILAR PRODUCTS
| MU-GAIH83 | MU-TAIH23 | MU-TAIH02 |
| MC-GAIH83 | MC-TAIH23 | MC-TAIH02 |
| MU-GAIH14 | MU-TAIH52 | MU-TAIH03 |
| MC-GAIH14 | MC-TAIH52 | MC-TAIH03 |
| MU-GAIH84 | MU-TAIH53 | MU-TAIH12 |
| MC-GAIH84 | MC-TAIH53 | MC-TAIH12 |
| MU-GAIH22 | MU-TAIH62 | MU-TAIH13 |
| MC-GAIH22 | MC-TAIH62 | MC-TAIH13 |
| MU-GAIH92 | MU-GAIH13 | MU-TAIH22 |
| MC-GAIH92 | MC-GAIH13 | MC-TAIH22 |
They perform engineering unit conversion, including fifth-order
polynomial temperature input characterization, if the high level
processor receives these inputs from mV/I converters. Through use
of a dual processor design and custom integrated circuits, the low
level analog input processor supports software configuration per
channel for different thermocouples or RTD types with excellent
resolution and accuracy. Open thermocouple detection is performed
once per scan so that no bad data is propagated for control
processing. The Low Level Multiplexer (LLMUX) processor provides an
economical way to bring in a large number of data acquisition
signals. Each processor can handle 32 points, using two 16-point
FTAs. Every point is scanned once per second with a one second scan
delay for processing. Open thermocouple detection is performed
every 30 seconds for all points.
Options for either local or remote cold junction reference are
available. The Remote Hardened Multiplexer (RHMUX) processor
provides functionality similar to that of the LLMUX, but the two
16-input FTAs may be mounted up to 2 km away from the xPM cabinet.
Each FTA is mounted in its own NEMA-4 or -4X enclosure, providing
protection against precipitation, hosedown, and windblown dust. The
FTA itself is conformally coated, and is capable of operation in a
GX “Severe” corrosive environment and in the presence of condensing
humidity.
Power for the RHMUX’s remote FTAs is provided by one of two power
adapters, which provide power limiting, serial data interfaces, and
galvanic isolation. The power adapter mounts in the FTA tray in the
xPM cabinet, and provides the interface between the IOP and the two
remote FTAs. The Intrinsically Safe Power Adapter (ISPA) allows the
FTAs to be placed in Division 1 or Zone 0 environments
Every point is scanned once per 4 seconds. Data is made available
at the end of each scan; there is no additional processing latency.
Open-thermocouple detection (OTD) is optionally performed on every
measurement. If enabled, the OTD test is performed immediately
after the A/D conversion. If the test indicates an open
thermocouple, data from the just-completed conversion will not be
propagated. To prevent spurious ground paths from affecting
readings, ground-fault detection is performed. All RHMUX remote
FTAs are equipped with a local cold junction reference The RHMUX
IOP is configured into the TPS PM system as a standard LLMUX. This
permits using the RHMUX in Release 300 and greater systems.
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC - |
| Fanuc motor A0- | Yokogawa transmitter EJA- |
Contact person: Anna
E-mail: wisdomlongkeji@163.com
Cellphone: +0086-13534205279
