Home Companies Shenzhen Wisdomlong Technology CO.,LTD

Emerson Module DELTAV KJ3201X1-BA1 VE4001S2T2B2 12P2535X042 Dry Contact Card

Contact Us

[China]

Trade Verify

Address: 23E BlockB,Lushan Building，Chunfeng Road,Luohu District,Shenzhen,518001,China

Contact name:Eva

Shenzhen Wisdomlong Technology CO.,LTD

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Emerson Module DELTAV KJ3201X1-BA1 VE4001S2T2B2 12P2535X042 Dry Contact Card

Country/Region	china
City & Province	shenzhen guangdong
Categories	Solar Chargers

Product Details

Emerson Module DELTAV KJ3201X1-BA1 VE4001S2T2B2 12P2535X042 Dry Contact Card

Quick detail:

KJ3201X1-BA1

DI, 8-Channel, 24 VDC, DryContact Series 2 Card

Both NEW and USED are available.

Alternate Part Number:

EMERSON 12P2535Xxxx

Power Specifications

LocalBus power rating	12 VDC at 150 mA
Bussed field power rating	24VDC at 100 mA
Field circuit rating	24 VDC at 5 mA/channel

Environmental Specifications

Ambient Temperature	-40 to 70oC
Shock	10g ½ Sinewave for 11 msec
Vibration	1mm Peak to Peak from 5 to 16Hz; 0.5g from 16 to 150Hz
Airborne Contaminants	ISA-S71.04 –1985 Airborne Contaminants Class G3
Relative Humidity	5 to 95% Non-Condensing IP 20 Rating
Terminal block key position	B1

Note:

Refer to the product label for serial number and location and date of manufacture. Refer also to

the wiring diagram on the left side of the card.

Warning:

This product has specific instructions for installation, removal and operation in hazardous areas. Refer to document 12P2046 "DeltaV Scalable Process System Zone 2 Installation Instructions".Other installation instructions are available in the "Installing Your DeltaV Automation System" manua.

Removal and Insertion

Field power supplied to this device, either at the field terminal or as bussed field power through the carrier, must be removed before removing or connecting the device. This unit may be removed or inserted while system power is energized under the following conditions:

(Note Only one unit at a time may be removed with system power energized.)

•When used with KJ1501X1-BC1 System Dual DC/DC Power Supply operating on 24 VDC or 12 VDC input power. The primary circuit wiring inductance for input power must be less than 23 uH, or a certified supply with an open circuit voltage, Ui of 12.6 VDC and an Lo of less than 23 uH (including wire inductance).

An I/O loop assessment must be completed on all energy -limited nodes.

A terminal block fuse may NOT be removed with field power energized for non-sparking circuits.

Maintenance and Adjustment

This unit contains no user serviceable parts and should not be disassembled for any reason. Calibration is not required.

Similiar Models: