|
[China]
Trade Verify
Address: 5F, Building D South, Jinshenghui Science Park, No. 3, Dafu Road, Fucheng Street, Guanlan, Longhua District, Shenzhen, China
Contact name:Michelle Guo
E-link China Technology Co.,LTD |
|
Verified Suppliers
|
|
|
Power Over Ethernet Injector Gigabit 30W 802.3at PoE Adapter With Power Cord
PoE Adapter Advantages
► Compliant with Limited Power Source (LPS)
► Low No Load Power Consumption < 0.5W
► Provide 2 LED indicators include Power LED(Green) and PoE LED(Orange)
► Over-Voltage/Load/Temperature & Short Circuit protections
► Plug & Play, no configuration required
► Automatic Detection and Protection of Non-standard Ethernet Terminals
Technical Indexes
Standards: | IEEE 802.3 10Base-T Ethernet |
IEEE 802.3u 100Base-TX Fast Ethernet | |
IEEE 802.3ab 1000Base-T Gigabit Ethernet | |
Processing Type: | Forward |
Half-duplex, Full-duplex | |
Forward Filter Rate: | 1,488,000pps (1000Mbps) |
Cabling: | 10/100/1000Base-T: Cat5 or above |
Maximum Distance: | IEEE802.3af/at PoE (30W): 2-pair UTP Cat. 3, 4, 5, up to 100m (328ft) |
Connector: | LAN: 1 x RJ-45 STP, “Data” Input Port POE: 1 x RJ-45 STP, “Data + Power” Output Port AC Connector: 1 x AC Input power socket, IEC-60320 C13 |
Operating Temperature: | -10°C to 50°C (14°F to 122°F) |
MTBF: | >200,000hrs |
Input Voltage Range: | 100-240V AC @50/60Hz. |
Output Voltage: | DC 48V |
Power Consumption: | 30 watts max. |
Overview
LNK-POE300AT 30W – 48V Gigabit PoE Injector is a long-distance driving, fast network performing, strong PoE Output IEEE802.3af/at certified midspan. It is a single port indoor PoE injector that can provide up to 30W based on the IEEE 802.3af/at standard. The midspans are ideal to power 802.11 access points, pan-tilt-zoom (PTZ) and dome cameras, IP videophones, thin clients and other power Ethernet end terminals with 30W of power. The solutions support IEEE 802.3af/at powered devices and are also backward compatible and safe to use with any IEEE 802.3af/at terminal. With plug and-play installation, they are easy and cost effective to implement leveraging existing Ethernet infrastructure while at the same time providing the assurance of a future proof network.
Ordering Information
Model | Description |
LNK-POE300AT | PoE Injector with Power Cord: 10/100/1000Mbps, IEEE 802.3at 30W |
