|
[China]
Trade Verify
Address: 5F, Building D South, Jinshenghui Science Park, No. 3, Dafu Road, Fucheng Street, Guanlan, Longhua District, Shenzhen, China
Contact name:Michelle Guo
E-link China Technology Co.,LTD |
|
Verified Suppliers
|
|
|
SFP Optical Module 10G Bidirectional SFP Module Fiber Optic
Transceiver Connector
Commercial SFP Module Advantages
► Hot-pluggable SFP footprint
► RJ45 Connector
► Supports Links up to 30m using Cat 6a/7 Cable
► Fully metallic enclosure for low EMI
High-speed Electrical Interface Transmission Line-SFP
Parameter | Symbol | Min. | Typ | Max | Units | Notes/Conditions |
Line Frequency | fL | 10 | 125 | 1000 | MHZ | 5-level encoding,per IEEE 802.3 |
Tx Output Impedance | Zout,TX |
| 100 |
| Ohm | Differential,for all frequencies between 1MHz and 125MHz |
Rx Input Impedance | Zin,RX |
| 100 |
| Ohm | Differential,for all frequencies between 1MHz and 125MHz |
The LNK-SFP-10G-T has an input voltage range of 3.3V +/-5%,The 4 V maximum voltage is not allowed for continuous operation. E-link transceivers are Class 1 Laser Products comply with FDA regulations. Meet Class 1 eye safety requirements of EN 60825 and the electrical safety requirements of EN 60950.
Note:
1.Clock tolerance is +/- 50 ppm
2.By default, the LNK-SFP-10G-T is a full duplex device in
preferred master mode
3.Automatic crossover detection is enabled. External crossover
cable is not required
4. Multi- BASE-T operation requires the host system to have an
SGMII interface with no clocks.
Ordering information
Part No. | Data Rate | Laser | Fiber Type | Distance | Optical Interface |
LNK-SFP-10G-T | 10G | N/A | N/A | 30m | RJ45 |
