E-link China Technology Co.,LTD |
Verified Suppliers
|
|
This product is compliant with the QSFP28 standard, specifically
specified in SFF-8636 Rev 2.10a. It also meets the requirements of
IEEE802.3cu D3.2 for 100GBASE-DR.
The high speed I/O electrical interface used is CAUI-4, and it
operates with a single 3.3V supply voltage. The maximum power
consumption is 4W and it has an operating temperature range of 0-70
ºC.
The product utilizes a 1311nm EML laser and PIN receiver, and has a
hermetically sealed TO based design. It is packaged in a QSFP28 MSA
package with a duplex LC connector.
With a two wire serial interface and digital diagnostic monitoring,
this product also has KP4 FEC termination inside the module. It
supports a 500m reach of single mode fiber.
Additionally, this product complies with EU Directive 2011/65/EU,
making it RoHS compliant. It is classified as a Class 1 Laser
Product.
Parameter | Symbol | Min. | Max. | Unit | Notes |
Storage Temperature | TS | -40 | +85 | ºC | |
Supply Voltage | VCC | -0.3 | 3.6 | V | |
Relative Humidity (non-condensing) | RH | 5 | 95 | % | |
Data Input Voltage – Differential | lVDIP-VDINl | - | 1.0 | V | |
Control Input Voltage | VI | -0.3 | Vcc+0.3 | V | |
Control Output Current | IO | -20 | 20 | mA |
Table 2 – Recommended Operating Conditions
Parameter | Symbol | Min. | Typical | Max. | Unit | Notes |
Operating Case Temperature | TOPR | 0 | - | 70 | ºC | |
Power Supply Voltage | VCC | 3.135 | 3.3 | 3.465 | V | |
Instantaneous peak current at hot plug | ICC_IP | - | - | 1600 | mA | |
Sustained peak current at hot plug | ICC_SP | - | - | 1320 | mA | |
Maximum Power Dissipation | PD | - | - | 4 | W | |
Maximum Power Dissipation, Low Power Mode | PDLP | | |
1.5 | | |
Signalling Rate | SR | - | 53.125 | - | GBd | |
Control Input Voltage High | VIH | VCC*0.7 | - | VCC+0.3 | V | |
Control Input Voltage Low | VIL | -0.3 | - | VCC*0.3 | V | |
Two Wire Serial Interface Clock Rate | - | - | - | 400 | kHz |
All QSFP Fiber Transceivers are carefully packaged to ensure safe
delivery to our customers.
The transceivers are first placed in anti-static bags to protect
them from electrostatic discharge. They are then placed in
individual boxes with foam padding to prevent any damage during
transportation. These boxes are then placed in a larger shipping
box with additional protective material to further ensure the
safety of the products.
For shipping, we use trusted carriers such as FedEx, UPS, and DHL
to ensure timely and secure delivery. We offer various shipping
options including standard, expedited, and overnight shipping to
meet our customers' needs.
Each package is labeled with the product name, model number, and
serial number for easy identification. We also include a packing
slip with the order details for our customers' reference.
At QSFP Fiber Transceivers, we take great care in packaging and
shipping our products to provide our customers with the best
possible experience.
Part No. | Application | Data Rate | Laser Source | Fiber Type |
LNK-QSFP28-DR1 |
100GBASE-DR | 100GE (53.125 GBd) |
1311nm EML |
SMF |