Shenzhen Olycom Technology Co., Ltd. |
Verified Suppliers
|
|
8 Port Poe Switch with 90W managed 2*2.5Gb SFP ports+2 combo ports POE fiber switch
Introduction
OM-FPH21008GW is Gigabit Managed 10-port,L2 Gigabit Ethernet 90W PoE Ring Switch.OM-FPH21008GW provides IEEE802.3af/at/bt compliant up to 90W PoE power on 8 copper ports for total power of 720W ,This enables it to provide power for the most demanding PoE applications for PTz domes,LED lighting and wireless products. It is compliant to G.8032 ERPS V1/V2 Ring protocol.
Key Features
▪ 8x 10/100/1000Base-T RJ-45 and 2x 100/1000/2500Base-FX SFP Fiber
▪ 2 Copper/MSA Fiber Combo ports ( Port 9, 10, and FX1, FX2)
▪ Supports negative RS-232 console port
▪ Support POE af/at/bt for port 1-8, each network port can reach 90W max. Total POE budget is 720W.
▪ Cable diagnostic, Measuring cable normal or broken point distance
▪ Input 100-240VAC
▪ STP, RSTP, MSTP, ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) for redundant cabling
▪ Supports Green Ethernet IEEE802.3az EEE (Energy Efficient Ethernet) management to optimize the power consumption
▪ DHCP Server/Client/Relay/Snooping/Snooping option 82/Relay option 82
▪ QoS, Traffic classification QoS, CoS, bandwidth control for Ingress and Egress, Storm Control, DiffServ
▪ IEEE802.1q VLAN, MAC based VLAN, IP subnet based VLAN, Protocol based VLAN, VLAN translation, GVRP, MVR
▪ Dynamic IEEE 802.3ad LACP Link Aggregation, Static Link Aggregation
▪ IGMP snooping V1/V2/V3, IGMP Filtering/ Throttling, IGMP query, IGMP proxy reporting, MLD snooping V1/V2
▪ Security : Port based and MAC based IEEE802.1X, RADIUS, ACL, TACACS+, HTTP/HTTPS, SSL/SSH v2
▪ Software upgrade via TFTP and HTTP, redundant firmware to avoid in case of upgrade failure
▪ Supports IEEE1588 PTP V2 for precise time synchronization to operate in Ordinary-Boundary, Peer to Peer Transparent Clock, End to End Transparent Clock, Master, Slave mode by each port
▪ RMON, MIB II, Port mirroring, Event syslog, DNS, NTP, IEEE802.1ab LLDP
▪ Supports IPv6 Telnet server /ICMP v6
▪ CLI, Web based management, SNMP v1/v2c/v3, Telnet server for management
Specification of Industrial 6 port POE Switch
Product Name | 10/100/1000Mbps Managed POE Fiber Switch (2F+10TP) |
Model No. | OM-FPH21008GW |
Port | 2x 100/1000/2500Base-FX SFP Fiber SM:1310nm/1550nm,20Km ;1490nm/1550nm, 40~120Km; MM:1310nm, 2Km; 8x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
Standard | IEEE 802.3: 10Base-T 10Mbit/s Ethernet IEEE 802.3u: 100Base-TX, 100Base-FX, Fast Ethernet IEEE 802.3z: 1000Base-T Gbit/s Ethernet over fiber optic IEEE 802.1d: STP (Spanning Tree Protocol) IEEE 802.1s: 100Base-TX, 100Base-FX, Fast Ethernet IEEE 802.1w: RSTP (Rapid Spanning Tree Protocol ) ITU-T G.8032 :ERPS (Ethernet Ring Protection Switching) IEEE 802.1Q: Virtual LANs (VLAN) IEEE 802.1X: Port based and MAC based Network, Access Control, Authentication IEEE802.3ac: Max frame size extended to 9600Bytes. IEEE 802.3ad: Link aggregation for parallel links with LACP(Link Aggregation Control Protocol) IEEE 802.3x: Flow control for Full Duplex IEEE 802.1ad: Stacked VLANs IEEE 802.1p: LAN Layer 2 QoS/CoS Protocol for Traffic Prioritization IEEE 802.1ab: Link Layer Discovery Protocol (LLDP) IEEE 802.1az: EEE (Energy Efficient Ethernet) IEEE802.3af: 15.4W IEEE802.3at: 30W IEEE802.3bt: 90W |
VLAND ID | 4096 IEEE802.1Q VLAN VID |
Switch Architecture | Back-plane (Switching Fabric): 21Gbps Full wire-speed |
Data Processing | Store and Forward |
Flow Control | IEEE 802.3x for full duplex mode Back pressure for half duplex mode |
Network Connector | 8x 10/100/1000Base-TX RJ-45 with POE AF/AT/BT Auto MDI/MDI-X function, |
Console | RS-232 (RJ-45) |
Network Cable | UTP/STP above Cat. 5e cable |
Protocols | CSMA/CD |
Reverse Polarity Overload Current Protection | Supported Supported |
CPU Watch Dog | Supported |
Power Supply | Input AC100-240VAC (Internal Power supply) |
Power Consumption | 3.5W(no-load)
|
LED | Per unit: Power 1 (Red), SYS (Red), Alarm (Red) PoE(Green) RJ-45 port: Link/Active (Green) Speed(Yellow) SFP Fiber port: Link/Active (Green) |
Jumbo Frame | 9.6KB |
IEEE802.3ac | Max frame size extended to 1522Bytes (allow Q-tag in packet) |
MAC Address Table | 8K |
Warning Message | System Syslog, alarm relay |
Alarm Relay Contact | Relay outputs with current carrying capacity of 1 A @30VDC |
Operating Temperature | -10 ~ 55°C |
Operating Humidity | 0% to 95% (Non-condensing) |
Storage Temperature | -40 ~ 85°C |
Dimensions | 288 x 270 x 45.5mm |
Weight | 0.85kg |
Installation Mounting | Rack-mounted |
FCC Emmission | CE FCC Part 15 Subpart B Class B 2010 EN50121 EN 5502:2006+A1:2007 EN61000-3 EN55035 EN55032 EN50155 2:2006+A1:2009+A2:2009 |
Safety | EN62368 |
6KV Surge Protection | Supported for UTP and Fiber port |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Software Specifications | |
Topology | |
VLAN | IEEE 802.1q VLAN,up to 4094 802.1Q VLAN VID IEEE 802.1q VLAN,up to 4094 Groups IEEE 802.1ad MAC-based VLAN,up to 256 entries IP Subnet-based VLAN, up to 128 entries Protocol-based VLAN(Ethernt, SNAP, LLC), up to 128 entries VLAN Translation, up to 256 entries GVRP (GARP VLAN Registration Protocal) MVR ( Multicast VLAN Registration) |
Link Aggregation (Port Trunk) | Static (Hash with SA, DA, IP, TCP/UDP port), up to 5 trunk group Dynamic (IEEE 802.3ad LACP), up to 5 trunk group |
Spanning Tree | IEEE802.1d STP IEEE802.1w RSTP IEEE802.1s MSTP |
POE/POE+
| IEEE802.3at 30W IEEE802.3af 15.4W IEEE802.3bt 90W |
Loop Protection | Supported |
ITU-T G.8032 / Y.1344 ERPS (Ethernet Ring Protection) | Recovery time <50ms Single Ring, Sub-Ring, Multiple ring topology network |
QoS Features | |
Class of Service | IEEE802.1p 8 active priorities queues for per port |
Traffic Classification QoS | IEEE802.1p based CoS IP Precedence based CoS IP DSCP based CoS |
Traffic Classification QoS | QCL(QoS Control List): Frame Type, Source/ Destination MAC, VLAN ID, PCP, DEI QCE(QoS Control Entry): Protocol, Source IP, IP Fragment, DSCP, TCP/UDP port number |
DiffServ (RF 2474) Remarking | |
Storm Control | for Unicast, Broadcast, Multicast |
IP Multicasting Features | |
IGMP / MLD Snooping | IGMP Snooping v1, v2, v3 / MLD Snooping v1, v2 Port Filtering Profile Throttling, Fast Leave Maximum Multicast Group : up to 1022 entries Query / Static Router Port |
Security Features | |
IEEE 802.1X
| Port-Based MAC-Based |
ACL | Number of rules : up to 256 entries for L2 / L3 / L4 L2 : Mac address SA/DA/VLAN L3: IP address SA/DA, Subnet L4: TCP/UDP |
RADIUS authentication & accounting | |
TACACS+ authentication & accounting, TACACS+ 3.0 | |
HTTPS, HTTP | Supported |
SSL / SSH v2 | Supported |
User Name Password Authentication | Local Authentication Remote Authentication (via RADIUS / TACACS+) |
Management Interface Access Filtering | Web, Telnet / SSH , CLI RS-232 console
|
Management Features | |
CLI | Cisco® like CLI |
Web Based Management | |
Telnet | Server |
SNMP | V1, V2c, V3 |
SW & Configuration Upgrade | TFTP, HTTP Redundant firmware in case of upgrade failure |
Modbus/TCP | Support for management and monitoring
|
RMON | RMON I , RMON II |
MIB | RFC1213 MIB II, Private MIB |
UPnP | Supported |
DHCP
| Server, Client, Relay, Snooping Snooping option 82 Relay option 82 |
IP Source Guard | Supported |
Port Mirroring | Supported |
Event Syslog | Syslog server (RFC3164) (Support 1 server ) |
Warning Message | System syslog, e-mail, alarm relay |
IEEE1588 | Support |
NTP | Client |
DNS | Client, Proxy |
LLDP (IEEE 802.1ab) | Link Layer Discovery Protocol LLDP-MED |
IPv6 Features | |
IPv6 Management | Telnet Server/ICMP v6 |
SNMP over IPv6 | Supported |
SSH over IPv6 | Supported |
IPv6 NTP | Client |
IPv6 QoS | Supported |
HTTP over IPv6 | Supported |
IPv6 Telnet | Supported |
IPv6 TFTP | Supported |
IPv6 ACL
| Number of rules: up to 256 entries for L2 / L3 / L4 L2 : Mac address SA/DA/VLAN L3: IP address SA/DA, Subnet L4: TCP/UDP |
Others Features | |
Green Ethernet
| Supports IEEE802.3az EEE (Energy Efficient Ethernet) Management to optimize the power consumption Determine the cable length and lowering the power for ports with short cables Lower the power for a port when there is no link LED Power Management :Adjustment LEDs intensity
|
Cable Diagnostic | Measuring UTP cable normal or broken point distance |
Packing box of switch
Advantage
1. Manufacturing: We are a powerful factory and has been in this industry about 10 years
2. Professional R&D center: We have a professional and independent R&D team. Most our engineers have more than 5 years experience.
3. Fast dispatch: Most of the products are in stock. Below 10pcs can arrange delivery with 3 days.
4. Small order accepted: Low MOQ accepted. 1pcs are available.
5. Reliable and Timely customer services;