Home Companies Shenzhen Olycom Technology Co., Ltd.

Industrial SFP Gigabit PSE PoE Media Converter 1.25G Optical Slot 15.4W / 30W

Contact Us

[China]

Trade Verify

Address: 4/F, 2-3 Building, Tongfuyu Industrial Zone, Aiqun Rd, Shiyan, Baoan District, Shenzhen, China

Contact name:Sales

Verified Suppliers

Din Rail Gigabit PoE+ Fiber Media Converter

Introduction to Gigabit Media Converter

Features one 10-/100-/1000-Mbps copper port and one SFP fiber port
UTP port is auto-sensing with Auto MDI/MDI-X and supports 802.3af 802.3at POE
Rugged metal case
Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
IEEE 802.3 10Base-T and IEEE 802.3u 1000Base-TX compliant
Detect the PoE models of electrical devices

Specification of Rugged Fiber Ethernet Converter

Product Name	10/100/1000Mbps Industrial POE Fiber Media Converter (1F+1TP)
Port	1 x 1000Mpbs fiber port SM: 1310nm/1550nm, 20Km 1490nm/1550nm, 40~120Km MM: 1310nm, 2Km 1x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing)
Switching features	Transmission mode: storage and forward System bandwidth: 4Gbps (non-traffic jam)
Network media	10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) Fiber port, transmission distance: 20Km, 40Km, 60Km, 80Km, 100Km
LEDs	Power, network, fiber
Power supply	POE power supply input voltage: 48V (max 52V), Single PoE power supply output power: 15.4W (port 1) (802.3at standards required special instructions)
Environment	Working temperature: -40°～ 85°C Storage temperature: -40°～ 85°C Working humidity: 10%～90%, non-condensing Storage humidity: 10%～95%, non-condensing
Safety	CE Mark ,commercial CE/LVD EN60950
Mechanical information	Shell: Corrugated metal shell Safety class: IP40 Dimension: 113.8 x 93 x 34.9mm Mounting method: Din-rail mounting
Warranty	Replacement within 1 year; 3 years repairing

Fiber Options

On the fiber side there are 2 main options for you

SFP Optical Port

1*9 Fixed Fiber Module

The standard packing usually contains a main device, a warranty card and a user manual.
Packing box dimension for 1pc: 25.3*20.8*8cm
Packing: 20pcs in a packing box of 67*33*47cm dimension

Application of POE media converter

QC Profile

Welding: Weld the necessary components
2. Cleaning: To avoid any possible dysfunction due to dust or scraps on the PCB boards.
3. Assembling: Builds up components of a product, like panels, screws, PCB boards.
4. Testing: To make sure the product is basically working fine after assembling
5. Aging: To check if the product can work smoothly for long time without any minors such as LED indicators, voltage. This will usually last for 24 to 48 hours.
6 Testing: To test if the product can process data or video signals correctly. Any data loss? Transmission rate correct? Any data packet failure? Such questions would be verified in this procedure.
7. QC testing: This is the third and also last check of product quality. If it goes good, our packing staff will pack it up according to customer requirements and attach to the packing box a product label.
When all above is done, the product will go to market.

E-mark 8-port Unmanaged Din Ethernet Switch Key Features of E-mark Ethernet Switch 8 x 10/100...

8 port Industrial non-POE E-mark approved Ethernet switch Basic Information of E-Mark GbE Switch ...

8 port 10/100/1000M automotive e-mark Certified Ethernet switch Key features of E-Mark Gigabit ...

10/100/1000M 5 port hardened ethernet unmanaged switch Key Features of din Ethernet switch 5 x 10/ ...

Industrial Compact Ethernet 4 Port Gigabit unmanaged switch Key Features of fiber switch 4 port sfp ...

Industrial Compact Ethernet 4 Port Gigabit unmanaged switch Key Features of industrial switch 24v ...

Related Products