Shanghai Kaisen Environmental Technology Co., Ltd. |
|
Single Arm Industrial Mobile Welding Smoke Cleaner System Polyester Material HEPA Filter Cartridge
Main features
Fume collector is configured with one suction arm. The bottom has
two directional and two rotary
polyurethane casters with brake device for easy moving and
stationing. It is suitable for the purification of
fume and dust generated in all kinds of welding, grinding and other
places as well as for collecting rare metal
particles and precious materials.
Suction arm can be rotated 360 °, and can flexibly and easily reach
the position and angle of sucking by
pulling the handle of the hood and position by itself in the
absence of external force. Depending on needs,
2m, 3m flexible suction arm are available. Suction hose uses high
temperature-resistant, flame retardant and
wear-resistant composite materials, and will not crack after
burning through by spark and has a longe usage
life; the arm diameter is 160mm.
Fume generated in working will be sucked into the purifier through
the hood, first through the fire resistance
net, large particles and sparks produced in grinding is intercepted
and separated; then enter fume directing
layer,i.e. deflector, to ramify the fume to avoid residual spark
into the main filter cartridge directly; at last the
fume enter the third layer.
Power phase sequence instructions, short-circuit protection for
lack of phase, with shut down protection
measures when too high temperature.
With large air volume, low noise and better capture effect. Suction
hose uses the real anti-temperature, wear-
resistant compounded materials, without crack and damage to sparks.
The filter element of the welding fume extractor is produced using
imported PTFE membrance filter
material of high filtration precision and can filte out welding
fume of 0.1μm.