Self-Cleaning Grinding Dust & Powder Collector With Special Suction Hood And Hose For Grinder

Self-cleaning grinding smoke&powder precipitator with special suction hood and hose for grinder

Working principle

Separation:

Dust laden fume are sucked into the extractor by the suction force induced by fan’s working, with deflector fume’s flowing speed is slowed, big practical and sparks are cooled, separated and then settle into dust collector. Fine fume and dust enter into filter compartment to be filtered by the filtercartridge.

The filter cartridge is coated with PTFE film which is covered with uniform pores, it has good air permeability, and dusts are filtered out on its surface. Purified air enters into the filter cartridge’s interior and then discharged into workshop directly or out of the workshop through pipe line.
 

Cleaning:

When dusts accumulate continuously on filter cartridge’s surface, the pressure difference between its interior and exterior will increase steadily, when the pressure difference reach pre-set value(1500Pa), the pulse valve will open, dry, oil-free compressed air rush into the reverse blow cleaning system. The system rotate and high pressure air stream jet at the interior of filter cartridge, blow off dusts accumulated on the filter cartridge’s surface, dusts fall into dust collector under gravity, thus the whole cartridge’s surface is cleaned.
 
Product introduction

It is suitable for the purification of fume and dust generated in all kinds of welding, grinding and other places as well as for collecting rare metal particles and precious material.

The fume comes from the processing will be sucked into the extractor through the hood, first the fume passes the 1^st layer spark intercept steel mesh which will separate and intercept the spark initially. And the fume enters into second layer namely filter preventer plate to avoid residual sparks enter into main filter layer directly through ramifying the fume. 

Intelligent model using PLC automatic control makes operation easy,thefilter rotates with the use of full-automatic cleaning in all directions, so that there is a more thorough cleaning filter surface, always to guarantee aconstant air volume absorption. 

With large air volume, low noise and better capture effect. Suction hose uses the real anti-temperature, wear-resistant compounded materials, without crack and damage for sparks but longer life.

On the control panel, it includes:
 - Power switch
 - Power indicating light
 - PLC implementation of filter automatically cleaning
 - Fan rotation direction monitor (Inside the control box)
 
Main advantages

1. 24 months warranty besides filter cartridge.

2. Export many years, 10 years manufacturing experience.
3. Application for large fume occasion, the force of sucking is large. 
4. Large air flow is adjustable through the air flow valve on the suction hood.

5. We are one of the best brands in this filed in China, it will replace many famous brands products from Europe and USA. 

Technical parameters