Active Member
|
[China]
Address: Jiaoxi Industry Zone,Zhenglu Town,Changzhou City,Jiangsu Province,China.
Contact name:Mrs. Saffi Wang
Changzhou yimin drying equipment Co.ltd. |
|
|
YZG series Round Shape Vacuum drying ovens with solvent recovery
Round Shape Vacuum Drying Equipment YZG Series For Pharmaceutical Industry
Description
YZG series Round Shape Vacuum drying ovens with solvent recovery is to let the raw material to be dried at vacuum condition heating and drying. It uses vacuum pump to damp and make the working chamber form vacuum status. Therefore the dry speed of raw material is quickened and the energy is saved greatly.
Vacuum dry is divided into static and dynamic drier. Model FZG round vacuum drier or Model YZG square vacuum drier belongs to static drier. Model SZG double cone rotating vacuum drier belongs to dynamic drier. When raw material is dried in static drier, raw material is in static state and its shape can not be destroyed. Before drying, it can carry out the treatment of disinfection. When raw material is dried in dynamic drier, raw material is turned over ceaselessly. So it can be dried better and more uniformly.
In the state of vacuum, the boiling point of raw material will be dropped. Therefore it is suitable for drying raw material that is unstable or thermal sensitive. The vacuum drier is very airtight. So it is also suitable for drying raw material that contains strong irritative and toxic gases and the solvent needs to recovery.
Application
YZG series Round Shape Vacuum drying ovens with solvent recovery is suitable for drying heat sensitive raw material of pharmaceutical industry, chemical industry, foodstuff industry, chemical industry, Chinese traditional medicine industry, etc.
Features
Higher drying speed at lower temperature and the heat energy can be used fully.
Dry at low temperature or drying of heat sensitive raw material.
Dry raw materials that contain solvent and the solvent needs to recover.
Before drying, it can carry out disinfectant treatment. during drying, any impurity can not enter in it.
The dryer belongs to static vacuum one, the shape and volume of raw materials can not be damaged.
Technical Parameters
| Model | YZG-600 | YZG-800 | YZG-1000 | YZG-1400 |
| Size of baking tray (mm) | 310×600×45 | 520×410×45 | 520×410×45 | 460×640×45 |
| Quantity of baking trays | 4 | 4 | 12 | 32 |
Work pressure inside the pipe of baking support (MPa) | ≤0.784 ) | ≤0.784 | ≤0.784 | ≤0.784 |
operation temperature of baking support (℃) | 35-150 | 35-150 | 35-150 | 35-150 |
| vacuum degree inside the chamber when operation idle(MPa) | -0.1 | -0.1 | -0.1 | -0.1 |
Under -0.1Mpa and 110℃, water evaporation rate (kg/m2 ·hr) | 7.2 | 7.2 | 7.2 | 7.2 |
| vacuum pump with condenser pump | 2X-15A -2KW | 2X-30A-3KW | 2X-30A-3KW | 2X-70A-5.5KW |
| vacuum pump without condenser | SZ-0.5-1.5kW | SZ-1-2.2KW | SZ-1-2.2KW | SZ-2-4KW |
| Weight of drying chamber(kg) | 250 | 600 | 800 | 1400 |
| Inter size of chamber(mm) | φ600×976 | φ800×1247 | φ1000×1527 | φ1400×2054 |
| Outer size of chamber(mm) | 1135×810×1020 | 1700×1045×1335 | 1693×1190×1500 | 2386×1675×1920 |
Instruction to Ordering
1. When order, please choose suitable vacuum drier In accordance with the physical property. When order, please choose suitable vacuum drier in accordance with the physical property, primary moisture and final moisture of raw material to be dried and factors such as temperature, vacuum, drying amount and time and so on. Vacuum drier with same model has four heating ways, i.e. steam, hot water, heat conduction oil and electric heat. For example, in order to increase the output of product, the drying layer can be increased suitably. Please tell our
factory in time.
2. The auxiliary parts of vacuum drying system indicated in User’s
Manual can be supplied and installed by our factory. Please
indicate them when order.
If having special requirements, our factory can also design,
manufacture and install as request.
3. For the equipment, our factory will carry out guarantee of
repair, replacement and refund of substandard
products. All subassembly can be supplied in a long time. Please
put your mind at rest.
