Active Member
|
[China]
Address: Jiaoxi Industry Zone,Zhenglu Town,Changzhou City,Jiangsu Province,China.
Contact name:Mrs. Saffi Wang
Changzhou yimin drying equipment Co.ltd. |
|
|
LPG-500 diameter 4.5meter custom industrial Spray Dryer for pig
blood
Application
LPG-500 diameter 4.5meter custom industrial Spray Dryer for pig
blood is widely used in the liquid technology shaping and in
the drying industry. It is most suitable for producing powdered or
granular solid products from liquid state materials such as
solution, emulsion, suspension, and pumpable pastes. So, when the
size distribution, residual water contents, stacking density and
shape of final products must reach a certain precision standard,
the spray drying is one of the most desired technologies.
Principle of work
LPG-500 diameter 4.5meter custom industrial Spray Dryer for pig
blood is gas-liquid co-current flow drying equipment, using high-speed
centrifugal atomizer, the liquid will be atomized into fine
droplets, then mix with the hot air from the distributor in the
dryer, heat and mass transfer exchanges rapidly during the mixing
process. In a very short period of time the liquid become dry
powdered products. Production control and product quality control
is convenient and reliable. It is widely used in the drying
production of different types of liquids materials.
Features
1. Different types of solution, suspension, emulsion and cream
paste material can be dry for a one-time production.
2. The fog moment and fog droplet of spray-drying can be slightly
adjusted.
3. The hot air has been reasonable allocation, and the ceiling and
walls sticky situation has been eliminated.
4. It is suitable for the drying of thermo-sensitive and non
thermo-sensitive material at the same time. The product particles
are smaller than pressure spray dryer.
5. Simplify the production process, easy to use, good liquidity and
instant of the product.
Technical Parameters
| Specification | LPG5 | LPG25 | LPG50 | LPG100 | LPG150 | LPG200-3000 | ||
| Inlet temperature | ≤ 350°C | |||||||
| Outlet temperature | 80-90°C | |||||||
| Evaporating rate (kg/h) | 5 | 25 | 50 | 100 | 150 | 200-3000 | ||
| Rotating speed(rpm) | 25000 | 22000 | 21500 | 18000 | 18000 | 15000 | ||
| Dia. of atomizing tray(mm) | 50 | 120 | 120 | 120 | 150 | 180-340 | ||
| Heat source | Electricity | Electricity | Electricity+ steam, oil fuel, gas, or coal | |||||
| Electrical-heating power | 9 | 45 | 60 | 81 | 99 | ------------- | ||
| Dry powder Yield | ≥ 95 | |||||||
| A(mm) | 1000 | 1290 | 1730 | 2500 | 2800 | | |
| B(mm) | 2100 | 3410 | 4245 | 5300 | 6000 | |||
| C(mm) | 2300 | 4260 | 4645 | 6000 | 6700 | |||
| φ D(mm) | 1060 | 1800 | 2133 | 2560 | 2860 | |||
| E1(mm) | 1050 | 1200 | 1640 | 2100 | 2180 | |||
| E2(mm) | 1050 | 1200 | 1640 | 2100 | 2180 | |||
| F(mm) | 750 | 1000 | 1250 | 1750 | 1970 | |||
| G(mm) | 530 | 1700 | 1750 | 1930 | 2080 | |||
| H(mm) | 530 | 1300 | 1800 | 2600 | 3050 | |||
| I(mm) | 530 | 1550 | 1600 | 1780 | 1960 | |||
Dried Samples
1. Inorganic: aluminum nitride, zirconia, potassium fluoride,
bentonite, kaolin, barium sulfate, lead sulfate, sodium aluminum,
chromium oxide, titanium dioxide.
2. Macromolecule polymers: urea-formaldehyde resin, PVC.
3. Dyes: dispersol red FB, reactive dyes, etc.
4. Chemical Agents: silica dioxide, diatomite, sodium silicate,
wood calcium, sodium ligninsulfonate, naphthalene series water
reducer.
5. Pesticide: carbendazol chloride wettable power.
6. Food and feed additives: casein peptide phosphate, potassium
sorbate, fish serum.
7. Fertilizer: potassium humate, sodium humate.
