Wet Paste Rotating 300kg/H Spin Flash Dryer

Wet Paste Rotating Spin Flash Dryer 304SS 316L For Foodstuff XSG Series

XSG Series instant dry and rapid rotating spin flash dryer for wet paste

Descriptions

XSG Series instant dry and rapid rotating spin flash dryer for wet paste

is a new and high-efficiency drying equipment which is researched and developed for the sake of overcoming the low-efficiency and high energy-consuming of static drying. In its design, we have developed advantages and reduced shortcomings of common dryers, to realize the target of the consuming and high efficiency drying..

Principle of work

Hot air, from the bottom of drier, enters drying chamber with stirring and crushing device at a suitable atomizing speed. It exerts strong shearing, blowing, floating and rotating effect to raw material. Therefore, raw material is granulated through centrifuge, shearing, impacting and friction effect. It strengths the process of heat exchange. At the bottom of drier, the large and damp granules are crushed under the action of stirrer. While, granules that are small in particle and containing less moisture will belifted accompanied with revolving air stream. During that period, it is dried further. Because the two phases gas and solid of flows in rotating, the inertia of solid phase is more than that of gas and the relative velocity between solid and gas phases is large, it strengthens the process of heat exchange. Therefore, the equipment has big drying capacity.​

Features

1. There are many kinds feeding equipment for choosing and feeding is continue and static.

2. There is a cooling device at the bottom of drier, where is high temperature area heat sensitivity raw material can not contact with heat surface directly, therefore it solves the metamorphose problem of heat sensitivity raw material.

3. There are pressured seal and bearing cooling device, so can make the life of machine longer.

4. There is special equipment for sharing wind, and raising the amount of hot air.

5. There are rotational flow pieces inside the drying chamber. It is used to control the moisture and granule of raw material to needed level.

6. The machine could add specific gravity of materials compare with other drying method.

Application

Inorganic compounds: borax, calcium carbonate, hydroxide, copper sulfate oxide, barium carbonate, antimony trioxide, all kinds of metallic hydroxide, all kinds of heavy metallic salt, synthetic cryolite and so on.

Organic compounds: fenatrol (insecticide of agrochemicals), cadmium laurate, benzoic acid, germicide, sodium oxalate, cellulose acetate and so on.

Ceramics: kaoline, silicone trioxide, clay and so on.

Dyestuff: anthraquinone, black ferric oxide, indigo blue pigment, butyric acid, titanium hydroxide, zinc sulfide, all kinds of intermediate of azo dye stuff.

Foodstuff: soya protein, agglomerative starch, less, tritcin, wheat starch and so on.

Technical parameters

Dimension

Note: all details above for reference only. Because of material features, the parameters vary. we have the right to change but not notice, pardon!