Water Based Mould Release Agent For Shoe Sole Lower Mould

TDS Release agent PU-5118

Mould release agent water base for the shoe sole for the lower mould

Characteristic:

PU-5118 is a emulsion formed by mixing siloxane and silicone resin. Mainly used for polyurethane soles, self-crust, hard foam and other products, dry surface, light Natural, good alcohol solubility. It specially used for the lower show sole, middle show sole or the shoe insole production.

Physical property:

Application:

It’s mainly used in the Polyurethane filed and rubber field. It’s can be used to make the shoe sole and the moulded rubber products. It can used as Lubricants and anti-stick agents, It can be used as Release agent for phenolic and epoxy resins.

Operation:

When it is mainly used as an efficient release agent for polyurethane and rubber products, proposed to dilute 20-25 times after the use of water, used in sole mold, mainly for the shoe lower mould. Dilution is about 20-25 times. When this product is used for self-peeling products, it can achieve dry and natural bright effect. The recommended dilution ratio is 20-25 times.

Package:

25kg or 200kg per high quality plastic drums.

Shelf life:

12 months for each product at temperatures between 2° C and 30° C, provided it is stored in a dry place. Once the drums has been opened, the product must be used immediately.

.