Melan Measurement & Control Instruments (Shanghai) Co.,Ltd. |
|
Clamp
On Ultrasonic Flow Meter Heat Meter DN25 ID
I. INTRODUCTION
ML-F8 is very unique in its structural design. It uses a circular
magnetic steel to achieve automatic connection during
installation.It takes only 2-3 minutes to complete the whole
process from installation to measurement. It also adopts the
current popular OLED display, which makes it easy to read in low
light conditions.
ML-F8 is widely used in the production process for flow measurement
and monitoring. The application of the product continuously and
effectively controls the flow of the fluid, so as to improve the
yield of the product and even save the input of the personnel,
bringing benefits to the production enterprise.
II. FEATURES
III. SPECIFICATION
Model | ML-F8 |
Velocity Range | 0.1 m/s ~ 5.0 m/s |
Accuracy | ± 2.0% |
Repeatability | 0.80% |
Pipe Size | DN15,DN20,DN25,DN32,DN40,DN50 |
Data Storage | Daily, Monthly, Yearly Totalizer |
Analog output | 4~20mA, Maximum load: 600Ω |
Alarm output | OCT, Upper and lower limit alarm function (for option) |
Communication | RS485,support Modbus communication protocol |
Power Supply | 24VDC |
Cable Length | 1.8m |
Keypad | Four light touch buttons |
Screen | OLED 128*64 screen display |
Units | Metric and imperial units are available Cubic Meters(m3), Liters(L),USA Gallons(GAL)/hour, USA Gallons(GAL)/min Default unit setting: m3/h |
Totalizer | Six bit digit |
Piper Material | Stainless steel pipe, carbon steel pipe, PVC |
Case Material | Aluminum alloy |
Environment Temp. | 0℃-50℃ |
Medium Temp. | 0℃-50℃ |
Environment Humidity | 0-95% relative humidity, without condensation |
IP Grade | IP54 |
IV. PIPE SPECIFICATION
Size | DN15 | DN20 | DN25 | DN32 | DN40 | DN50 |
Nominal Pipe Diameter Size | 15mm | 20mm | 25mm | 32mm | 40mm | 50mm |
Pipe OD | 20mm | 25mm | 32mm | 40mm | 50mm | 63mm |
Pipe ID | 15mm | 19mm | 26mm | 33mm | 43mm | 55mm |
Inch | 1/2’’ | 3/4’’ | 1’’ | 1.2’’ | 1.5’’ | 2’’ |
V. COMPONENT PARTS
VI. Application