Waterproof IP68 Industrial Flow Meter / Combined Type Mag Flow Meter

                                      Waterproof IP68 Industrial Flow Meter / Combined Type Mag Flow Meter

1. Introduction

MLF electromagnetic flow meter, composed of sensor and converter, works based on Faraday’s law of electromagnetic induction law. It is used to measure electrical conductivity of liquid or solid. Generally, the electrical conductivity should be over 5υS/cm(electrical conductivity of tap water, raw water is about 100～500υS/cm),It can also be used to measure various media like acid, alkali, saline solution, paper pulp or pulp and so on. But these media can’t contain a lot of magnetic materials and bubbles.

MLF electromagnetic flow meter is a kind of instrument which is used for measuring the flow conductivity liquid. The meter is widely used in flow measuring of Metallurgy, Chemical Industry, Paper Industry,Environmental Protection, Oil Industry, Textile Industry, Food Industry and City Administration, Water Works,etc.

2. Quick Details

1). It is high resistance, fast response design can make undistorted collection of weak signal and fast response to the flow changes. Its range rate can reach 100:1.

2). It has the function of low conductivity measurement.

3). It has the consistency of converter’s interchange, which can avoid input parameters repeatedly.

4). Wide range of power supply mode is available (DC: 18V-36V/AC: 85V-265V).

5). It is the first domestic company that adopts the function of saving settings before delivery,which can avoid the loss of the parameters.

6). It adopts the international leading excitation technology, which circuit is simple, stable,and reliable.

7). It has the function of infrared remote control and button operation so as to make the operation more convenient.

8). It provides the function of zero correction of sensor and automatic zero adjustment.

9). It has Chinese, English, Korean, Polish, Turkish, French and Portuguese languages for option to satisfy different customers’ requirements.

3. Specification

4. Selection of Liner Material

5. Dimensional Sketches

a. Dimension of Converter

                                                                      Divided Type

                                                                      Integrated Type

                                                                  Battery Powered Type

b. Dimension of Sensor

6. Configuration

7. Instrument Detection & Maintenance

Electromagnetic Flowmeter has self-diagnosis function. In addition to power and hardware circuit failures, the system also alarm other faults in general use. The information is prompted in the lower right corner of the screen.

1. Maintenance and repair

a) sensor installation site should meet the requirements of Section 4, please keep the shell clean;

b) transmitters shall be placed in a clean, ventilated, dry place;

c) need to be checked every two years, for high-precision users, the instrument needs to be submitted for review.

2. Transport and storage

a) instruments must be packed before transportation, loading and unloading should be carefully light.

b) storage place must be dry, ventilated, avoid corrosive gas erosion, environmental temperature should not be too low or too high;

c) storage time should not exceed three years.

3. Open-box inspection

a) packing must not be opened with a heavy hammer, be careful not to damage the instrument

b) carefully check the contents according to the packing list.

8. Product Photos