|
[China]
Trade Verify
Address: N0.1, Dongli Road, Donglai, Zhangjiagang City
Contact name:Hua Dong
Jiangsu Cheonny Overlay Co., Ltd. |
|
Verified Suppliers
|
|
|
Inconel 625 Overlay Boiler membrane wall panel 100% Argon Protected
Production Information
Inconel cladding for tube is a cost-effective engineered solution against corrosion/ erosion attacks from combustion products in boilers and from the hot, exhaust flue gas stream in waste heat recovery systems. Inconel Cladding technique extends the operational life of tubes and waterwall panels, thus avoiding or delaying costly replacements.
Compared with other surfacing methods, gas shielded surfacing has the following advantages:
(1) Gas shielded welding is a kind of open arc welding. During the welding process, the heating and melting of arc and molten pool can be clearly seen, which is convenient to find problems and timely adjust, so the welding process and weld quality are easy to control.
(2) Gas shielded welding usually does not need to use tubular welding wire, so there is no slag in the welding process and no slag cleaning after welding, which saves the auxiliary labor hours of slag cleaning and reduces the welding cost.
(3) Wide range of application, high production efficiency, easy to carry out all-position welding and realize mechanization and automation.
(4) Suitable for welding most metal and alloy, most suitable for welding carbon steel and low alloy steel, stainless steel, heat resistant alloy, aluminum and aluminum alloy, copper and copper alloy and magnesium alloy.
There is a wide range of weldable metal thicknesses, with the thinest about 1mm and the thickest almost unlimited.
(5) The adaptability is also strong, and the welding efficiency is the highest when flat welding and horizontal welding.
Component | Non-clad steel | Steel clad with Alloy 625 |
Membrane wall in combustion room – lower area | 6-9 months | 3-4 years |
Membrane wall in combustion room – higher area | 2 years | > 8 years |
Reheater | 3-4 years | > 4 years |
Base material | » Pipe walls and single tubes in P235GH, 15Mo3, 13CrMo44, 10CrMo910 |
Welding materials | » Alloy 622 (US), alloy 625, alloy 686 (super heater tubes) galvanizing |
Shielding gas | » 4-component shielding gas: He = 32 %, H2 = 2 %, CO2 = 0.05 %, remainder Ar » Alternative choices of shielding gas |
Welding equipment | » GMAweldingequipmentwithpulsed-currentpowersources » Automatic burner processing |
Welding position | » Vertical down position preferred, layer width 15 - 20 mm |
Option for application | » On-site in the boiler with mobile welding equipment, minimum wall thickness 3 mm » Welding in the workshop weld metal overlay on new pipe walls and single tubes |
Technical requirements |
|
The most common problem in surfacing is cracking. The main methods to prevent cracking are as follows
1. Preheat before welding, control interlayer temperature and slow cooling after welding
2. Stress relief heat treatment after welding
3. Avoid multi-layer surfacing and use low hydrogen surfacing electrode
4. If necessary, build up the transition layer between the surfacing layer and the base metal (use the electrode with low carbon equivalent and high toughness)
Attention must be paid to butt welding:
1. According to the use requirements, reasonable selection of surfacing alloy
2. Reduce the dilution ratio of base metal as much as possible
3. Improve productivity
4. It is expected that the hardfacing metal and base metal have similar expansion coefficient and phase transformation temperature
Purpose of Inconel Cladding on surface :
1. Extend service life
2. Reduce costs
3. Reduce spare parts
4. Reduce maintenance
Our Service
High-quality products supplier
Customized products
Flexible requirements for order size
Diverse products
Competitive price
Professional technical and quality team
Professional sales team
A: We are manufacturer
A: Generally 5-10 days if the goods are in stock. or 25-35days if the goods are not in stock, it is according to quantity.
A: Yes, we could offer the sample extra
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30%
T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us
