Active Member
|
[China]
Address: ADD: Postcoade 053600 A017 Ziwu Indutries Zone Zi Wen Town Anping County Hengshui Heibei Province China
Contact name:
BOSS METAL AND PLASTIC CO.LTD |
|
|
BTO-22
Core wire :2.5±0.05mm
Blade :0.5±0.05mm
Mesh :150x75 mm
Panel Size :955×2500mm
Hot dipped GI : 275gsm (min.)
| SPECIFICATIONS | DESCRIPTIONS | |
| (A) Razor Weld mesh panel | The Razor Weld Mesh panel would be made with Medium Blade Profile Razor Tape | |
| Core Wire | Horizontal wire, Dia 2.5mm (+/- 0.05mm) ; min 0.5mm (+/-0.05) thick tape | |
| Razor Tape | min 0.5mm (+/-0.05) thick tape | |
| Mesh Size | Mesh Size of 75 X 150mm with mesh opening pf diamond/rhombus shape | |
| Panel size | 2500 x 955mm | |
| Metallic Coating | Core wire : 2.5 (+/-0.05)mm Hot dipped GI (min 275 gsm); Razor Strip sheet: 0.5 (+/-0.05)mm Hot dipped GI (min 275 gsm) | |
| Note | Three panels to be used to get a vertical height of 2700mm | |
| (B) Concertina coil | 1050 mm Dia / 56 turns/ 2.5 mm core wire. | |
| Coil Diameter | 1050 mm | |
| Type of Strip | Hot Dipped GI (min 275 gsm) | |
| Type of Core wire | Hot Dipped GI (min 275 gsm) | |
| Core wire Diameter | Min 2.5 mm | |
| Material | Hot Dipped GI (min 275 gsm) | |
| Weight | 15.2 ± 5% | |
| Number of turns | 56. | |
| Length when stretched | 10-12 m | |
| Blade profile | Tear Blade | |
| (C) Fence Post | ||
| Type | Circular Hollow | |
| Material | MS steel Tube (IS 1161). | |
| Dimensions | 76mm Dia, 3.2 mm ( +/- 10%) Thickness. | |
| Length | 3345mm (+/- 5%) (2745 mm above ground level + 600 mm under the ground level). | |
| Powder Coating | Hot Dip galvanized to minimum 350 GSM as per IS 2629/ IS 4759/ASTM A 123 | |
| Holes | Suitable holes of proper size to match the mounting of the clamps to be provided | |
(D) Clamps | To tighten the mesh panel along the post with GI strip 50 x 5 x 2700mm with 9 holes will be provided.Along with the clamp 9no of Mushroom Head Bolt (M8X120) with breakable head safety nut and washer (Material: SS 304, OD : 15.89mm, ID : 8.38mm, thickness ; 2.04mm.) will be provided. | |
| Coating | Hot dip galvanized | |
| (E) | Y-Arm | |
| Material | MS Angle Size: 50x50x5 mm. | |
| Length | 750 mm of one arm. | |
| Coating | Hot dip galvanized to 350 GSM Hot Dip Galvanizing as per IS 2629 / IS 4759 /ASTM A 123 | |
| Outer diameter | 63 mm of sleeve cap, Bolted on the top of the fence post. Straining post will be installed at every 30 meters. | |
| Accessories for fitting Y Arm | Mushroom Head Bolt with breakable head safety nut (M8X120) (2 Nos per post) | |
| Material | MS, IS 2062, galvanized | |
| (F) Razor Blade Tape | ||
| Material | Hot Dipped GI (min 275 gsm) | |
| Core wire Diameter | 2.6 ± 0.035 mm Dia. | |
| Blade profile | MBBT | |
| (G) | Anchor Rod | 10 mm dia 300 mm long GI Rod tie with fence post at bottom using tie wire. (01 nos for each post) |
| Sl.no | RAZOR WELD MESH | UOM | QTY |
| 1 | Razor Weld Mesh Panel with Accessories | NOS | 3 |
| 2 | clamps | NOS | AS REQUIRED |
| 3 | Mushroom Head Bolt Nut with Washer For fitting Razor panels | NOS | AS REQUIRED |
| 4 | Fence Post | NOS | AS REQUIRED |
| 5 | Y- Arm | NOS | 1 PER POST |
| 6 | Accessories for fitting Y Arm: Mushroom Head Bolt with breakable head | NOS |
AS REQUIRED |
| 9 | Punched Tape Concertina Coil | COIL | AS REQUIRED |
| 10 | Razor Blade Tape | RIM | AS REQUIRED |
| 11 | Anchor Rod | NOS | 1 PER POST |
(H) Tear Blade profile
Blade Length Minimum 22mm
Material Hot Dipped GI (min 275 gsm)
