Active Member
|
[China]
Address: ADD: Postcoade 053600 A017 Ziwu Indutries Zone Zi Wen Town Anping County Hengshui Heibei Province China
Contact name:
BOSS METAL AND PLASTIC CO.LTD |
|
|
Chain link fence is made from galvanized or PVC coated iron wire, to fix with posts, brace, and fittings to build a chain-link fence system in the park, tennis court, airport, and other places. Also can be used for animal breeding. Chain link is mainly divided into galvanized, PVC, PE-coated three finishing chain link fence with easy construction and maintenance, bright colors, which are the preferred products to beautify the urban environment.
2.chain link fence common specification:
| The dimension of Galvanized Chian Link Fence | |||
| Mesh | Wire Diameter | Width | Length |
| 40mmx40mm | 1.8mm--3.0mm | 0.5m--4.0m | 5m-25m |
| 50mmx50mm | 1.8mm--3.5mm | 0.5m--4.0m | 5m-25m |
| 60mmx60mm | 1.8mm--4.0mm | 0.5m--4.0m | 5m-25m |
| 80mmx80mm | 2.5mm--4.0mm | 0.5m--4.0m | 5m-25m |
| 100mmx100mm | 2.5mm--4.0mm | 0.5m--4.0m | 5m-25m |
| Dimension of PVC Coated Chian Link Fence | |||
| Mesh | Wire Diameter | Width | Length |
| 40mmx40mm | 2.8mm--3.8mm | 0.5m--4.0m | 5m-25m |
| 50mmx50mm | 3.0mm--5.0mm | 0.5m--4.0m | 5m-25m |
| 60mmx60mm | 3.0mm--5.0mm | 0.5m--4.0m | 5m-25m |
| 80mmx80mm | 3.0mm--5.0mm | 0.5m--4.0m | 5m-25m |
| 100mmx100mm | 3.0mm--5.0mm | 0.5m--4.0m | 5m-25m |
galvanized chain link fence weight :
| Mesh | Gauge(BWG) | Weight(kg/m2) | Width(m) | Length(m) |
| 1/2" | 14 | 4.4 | 0.5m-5.0m | 1.0m-50m |
| 3/4" | 12 | 6.0 | 0.5m-5.0m | 1.0m-50m |
| 3/4" | 14 | 3.3 | 0.5m-5.0m | 1.0m-50m |
| 3/4" | 16 | 1.9 | 0.5m-5.0m | 1.0m-50m |
| 1" | 12 | 4.0 | 0.5m-5.0m | 1.0m-50m |
| 1" | 14 | 2.4 | 0.5m-5.0m | 1.0m-50m |
| 1" | 16 | 1.4 | 0.5m-5.0m | 1.0m-50m |
| 5/4" | 12 | 3.2 | 0.5m-5.0m | 1.0m-50m |
| 5/4" | 14 | 1.92 | 0.5m-5.0m | 1.0m-50m |
| 3/2" | 10 | 4.0 | 0.5m-5.0m | 1.0m-50m |
| 3/2" | 12 | 2.7 | 0.5m-5.0m | 1.0m-50m |
| 3/2" | 14 | 1.6 | 0.5m-5.0m | 1.0m-50m |
| 2" | 8 | 4.16 | 0.5m-5.0m | 1.0m-50m |
| 2" | 10 | 3.0 | 0.5m-5.0m | 1.0m-50m |
| 2" | 11 | 2.5 | 0.5m-5.0m | 1.0m-50m |
| 2" | 12 | 2.0 | 0.5m-5.0m | 1.0m-50m |
| 2" | 9 | 3.2 | 0.5m-5.0m | 1.0m-50m |
Chain link fence surface treatment :
| Surface treatment | Min | Max |
| Electro-Galvanized | 15g/m2 | 25g/ m2 |
| Hot dip galvanized | 30/ m2 | 366g/m2 |
| PVC/PE Coated | 400microns | 1000microns |
3.Galvanized chain link fence :
4.PVC coated chain link fence :
CHOOSING THE BEST TYPE :
The main considerations are the height of the fence, the thickness of the wire, and the finish of the wire.
Height
Chain link fences may be anything from 3 feet the 12 feet high, the highest being generally used for surround sports areas where it is important to prevent balls escaping. Lower chain link fences for use around homes can be fitted with privacy slats.
Thickness of wire
The thickness of the wire for chain link fences can be quite confusing. Manufacturers will usually refer to the thickness of the wire being a certain 'gauge', for example, 11 or 12 gauge. Oddly, the higher the number of the
gauge, the thinner the wire. Thus, 11 gauge corresponds to a thickness of 0.120 inches, and a 12 gauge corresponds to a thickness of only 0.105 inches. Although gauges can vary between 6 and 14, the most common gauges for chain link fencing are 11, 11.5 and 12 gauge.
Finishes
Chain link fence is normally made from zinc galvanized steel wire, with the galvanizing being applied either before or after the weaving of the wire. It is preferable for the galvanizing to the applied before weaving, to ensure that all surfaces are fully galvanized. Of course, you can also select the PVC/PE coated chain link fence.
Edge type: Closed edge and twisted barbed edge
5.chain link fence fittings (terminal post, end post, corner post, gate post, line pot installing) :
chain link fence fittings installation live-action :
Packaging: Both ends are wrapped with plastic cloth and mesh bag, and then into the container. Special packaging requests are also accommodated.
Shipping: 15-20 days after we receive your payments
1.Provide sample (about 7 days)
2.Factory direct sale
3. It can customize according to the requirements or drawings
4. 24 hours online
5.With the fastest speed of delivery
6.Answer questions in a timely manner
7.After sales service installation instructions or other quality problems
